Advertisement
Quick Links
Advertisement
Related Manuals for Echelon STRIDE-RCX
Summary of Contents for Echelon STRIDE-RCX
- Page 1 Owner’s Manual...
-
Page 2: Important Safety Instruction
THANK YOU Thanks for purchasing this product. The product will help you keep fitter, healthier and better in a very easy way. Read and follow all warnings and instructions. For consumer fitness equipment, ensure that proper instructions are obtained prior to use. IMPORTANT SAFETY INSTRUCTION ... - Page 3 treadmill removed from service until the repair is made. Only manufacturer-supplied or-approved components shall be used to maintain and repair the treadmill. The safety level of the equipment can be maintained only if it is examined regularly for damage and wear. ...
- Page 4 The value of the A-weighted emission sound pressure level at the trainer’s ear: 68.4dB. Noise emission under load is higher than without load. Ask local distributor to handle any issue or provide service. It’s not allowed to dis- mantle the components personally.
- Page 5 12) To disconnect, turn all controls to the off position, then remove plug from outlet. CAUTION – To Reduce The Risk Of Injury From Moving Parts - Unplug Before Ser- vicing. WARNING – To Reduce the Risk of Electric Shock – Unplug Before Cleaning or Servicing ...
-
Page 6: Use Guide
uncontrolled environment. This equipment should be installed and operated with a min- imum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other an- tenna or transmitter. USE GUIDE ... - Page 7 that is properly installed and grounded in accordance with all local codes and ordi- nances. DANGER- Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded.
- Page 8 If anything goes wrong, you can make push-up on the handlebar, leave both leg from the running belt, and jump from outside the treadmill. Cut off the power before moving the treadmill. Don’t open motor and roller cover unless professional technician. ...
- Page 9 The patient with thrombosis. The patient with diabetes-caused perceptual disturbance. The person with skin injury. The patient with a high fever above 38°C. The person with bent back bone. The person with pregnancy or in (menstrual) period. ...
- Page 10 Do not use with damp hands. ◆ Do not pull out or plug in the power cord, otherwise you can be hurt or get an elec- tric shock. PLUG OUT TIPS In following cases, please pull out the power cord from the socket, otherwise can lead to fire as dust and humidity will get the power cord insulation worse OR you can be hurt or get an electric shock.
-
Page 11: Warning Labels
Warning labels... -
Page 13: Exploded Drawing
EXPLODED DRAWING... - Page 14 EXPLODED DRAWING CHART Description Specification Bottom frame Main frame Left upright Right upright Incline frame Console neck frame Handlebar frame Ezfit linking parts Handle grip Allen truss head half thread bolt half thread M8×50×20 Hex lock nut Allen half thread bolt M12×Φ14×35×19 Allen truss head half thread bolt M8×35×20...
- Page 15 Side cover LED strip housing LED strip Choke/filter bracket Rear wheel Motor belt Cushion 1 Brushless motor Incline motor Power switch Reset Switch Power cable buckle Left PU handlebar Right PU handlebar Left outer handlebar cover Left inner handlebar cover Right outer handlebar cover Right inner handlebar cover Upper tray cover...
- Page 16 main communication wire (dashboard) LED communication wire (dashboard) Pedal lever Wireless charging pad Motor fixed plate A Motor fixed plate B NOTE: We reserve the right to amend the product without prior notice. TREADMILL STRUCTURE LED display Handgrip with Dashboard pulse Right PU Left PU...
-
Page 17: Packing Parts
Packing parts Main frame Upright LED display Tray and handlebar Handgrip Silicone dashboard oil bottle Hardware User 说明书 manual... -
Page 18: Hardware Kit
Hardware kit L-shaped wrench T-shaped wrench Cross open wrench 5×30×80 6×80 14 x 17 x 75 Allen socket head full thread bolt Allen socket head full thread bolt M8×35 6PCS M8×45 2PCS Allen flat head full thread bolt M8×25 8PCS Main parts... - Page 19 Motor cover Brushless Motor belt LED display motor Rear Side rail Running belt Running roller deck Incline motor Front roller Rear cover...
-
Page 20: Assembly Instruction
ASSEMBLY INSTRUCTION Note: Do not plug in power socket before installation completes; Do not remove bands securing running deck to main frame until treadmill is in desired assembly location. Doing so could result in injury. Step 1: Take out the main frame and display from box and put it on the flat floor (As shown). - Page 21 Main communication communication wire wire Step 2: Connect the two communication wires between console frame and upright, then put the console frame onto the upright by 8 M8 x 25 Allen flat head full thread bolt, but don’t tighten them. Main communication communication...
-
Page 22: General Fitness Tips
socket head full thread bolt, tighten all bolts. The setup is completed. GENERAL FITNESS TIPS Warm-Up Do some warm-up for at least 5 to 10 minutes before every exercise. Breathe Make sure you breathe regularly, properly and calmly when exercising. Exercise Frequency It should have 48 hours of rest for the same muscles. - Page 23 problems. In the following you will find stretching exercise instructions for warming up and cooling down. Please pay attention to the following points: 1. TOUCH TOES Bend your trunk slowly forwards and try to touch your feet with your hands. Reach down as far as possible to your toes.
- Page 24 CONSOLE KEYPRESS INSTRUCTION LED panel display Incline fast key Speed fast key Metrics Incline: 0-15 TIME: 0:00-99.59 PULSE: 0-999 CALORIES: 0-999 SPEED: 0.6-12.5MPH (1.0-20.00 KMH) DISTANCE: 0-99.9 Incline fast key: level 2/4/6/8 Speed fast key: 2/4/6/8 mph (equals 3.2/6.4/9.6/12.8kmh) Dashboard keypress Program Stop/ Start...
- Page 25 Power on treadmill, the LED panel light up, you can either workout under LED panel alone, or log-in Echelon APPs, select your desired classes, click Play, the treadmill will start automatically, enjoy the running joy; when the class end, the treadmill will stop automatically.
- Page 26 Hand pulse: when power on, put both hands on the hand pulse, the heart rate will be displayed on PULSE window in LED; If connected to Echelon APPs, it will show in APPS, and LED on side rail will change color following heart rate zone...
-
Page 27: How To Use The Product
SPEED 11.0 INCLINE SPEED 10.0 11.0 12.0 INCLINE SPEED 10.0 11.0 INCLINE The Program has a 30-minute default countdown time. You may adjust the time by pressing UP and DOWN keys. If you want to quit Program, press STOP to go back to Quick Start. At Program mode, anytime press Mode key, the treadmill will enter the Target function. - Page 28 Workout in APPs, the treadmill will run again. Trouble shooting and maintenance Treadmill Item Reason Maintenance a no power Plug into socket b safety key isn’t in the Insert the safety key back to the safety key right position socket Treadmill doesn’t c Open circuit signal work...
- Page 29 in a normal Contact the after-sales team for service B、abnormal system state Replace the buttons A、Some buttons are Buttons don’t damaged or invalid work B、All buttons are invalid 1、Replace button board, wires of buttons 2, main board 3 or console Check and connect it well, or replace the handle A、Handle pulse wire isn’t No heart rate...
-
Page 30: Using Instruction
Using instruction： Treadmill folding and moving: 1、Folding... - Page 31 Cut off the power when plan to fold the treadmill. 2、Unfolding 1. When unfolding the treadmill, you should choose one place where around 1m away from the power socket, and the ground is flat without any barriers. 3、moving First you need be sure following things before moving： 1：the power is off；...
- Page 32 How to lubricate the belt: Step 1: Stop the running belt, and fold the treadmill. Step 2: Lift up the running belt from the back of main frame and put the silicone oil bottle as far as to middle of the belt, spray silicone oil starting from the middle of running belt then to two sides.
- Page 33 Running belt deviation adjustment: All running belts are properly set at the factory and after assembly. However, after a period of use, belt deviation might occur. The reasons might be as follows. ① The treadmill is not placed in level surface. ②...
- Page 34 Running deviation can seriously damage the running belt. It must be found and corrected in time. Customer Service Echelon Fitness Multimedia 605 Chestnut St. | Suite 700 | Chattanooga TN 37450 Questions or Concerns Our members are our priority! If you require assistance or have concerns, please contact our customer service team.
Need help?
Do you have a question about the STRIDE-RCX and is the answer not in the manual?
Questions and answers
What is the overall weight of machine?
The overall weight of the Echelon STRIDE-RCX treadmill is 120 kg.
This answer is automatically generated
i can't get the red key card to come out. Is it suppose to pull all the way out?
Yes, the safety key (red key card) on the Echelon STRIDE-RCX is designed to be pulled out. When the safety key is pulled out, the treadmill stops, and a flashing red LED appears. To restart the treadmill, the safety key must be inserted, and the Start key must be pressed or the workout resumed in the Echelon app.
This answer is automatically generated
What increments can the speed be increased or decreased?
What increments can the ECHELON Stride - 50 - RCW (may say LCD) treadmill increase or decrease the speed?
The speed increment options for the Echelon STRIDE-RCX are 2, 4, 6, and 8 mph, which correspond to 3.2, 6.4, 9.6, and 12.8 km/h.
This answer is automatically generated
I just purchased the echelon stride 50 rcx and set it up when I started using it after powering it up everything works on the screen except the distance it remains 0.0 Please help
The distance reading on the Echelon STRIDE-RCX may show 0.0 after setup because the treadmill has not been started. To begin operation, ensure the treadmill is powered on, and press the *Start* key. If the treadmill is in standby mode, pressing *Start* without selecting a program or mode should initiate movement. Additionally, check that the safety key is properly inserted, as the treadmill may not function without it.
This answer is automatically generated
does the echelon stride 50 rcx auto power off without using switch
The provided context does not mention an automatic power-off feature for the Echelon STRIDE-RCX treadmill. However, it does advise unplugging the power cord when the treadmill is not in use, under maintenance, or experiencing issues.
This answer is automatically generated