Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Asus AIO M3700WUA
Summary of Contents for Asus AIO M3700WUA
- Page 1 ASUS AIO M3700WUA/M3700WYA Service Manual...
- Page 2 INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR INTHIS MANUAL OR PRODUCT.
- Page 3 ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS' suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
- Page 4 Disclaimer ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation. Safety precautions • Before handling components, use a grounded wrist strap or touch a safely grounded object to avoid damaging them due to static electricity.
-
Page 5: Table Of Contents
Table of Contents • Components Top View • Button Cell • Appropriate Tools • Mainboard Shielding • Disassembly Steps: • Hinge Module • Back Cover • WLAN Antennas • Camera Module • Main Frame and Front Decobar • Cables • Stand •... -
Page 6: Components Top View
Components Top View ⧫ ⧫ ⧫ ⧫ ⧫ ⧫ DDR SHIELDING COVER ⧫ FAN BACK COVER CAMERA BRACKET MB COVER ASSY FRONT DECO MAIN FRAME ⧫ ⧫ ⧫ ⧫ ⧫ ⧫ ⧫ HDD BREAKET HINGE R+L IO BOARD MAINBOAR SPEAKER L+R STAND MB SHIELDING ⧫... -
Page 7: Appropriate Tools
Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS M3700 All-in-One PC. ⧫ ⧫ ⧫ Screwdriver ⧫ Alcohol 95% Glov Dust-free Cloth Please accord to different screw specification to choose different screwdriver and head. ⧫... -
Page 8: Back Cover
Back Cover Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the 5 mylar tabs. M2*4L(BNI) 2.5±0.2 Step 2 : Remove the 5 screws. M3*6L(WNI) 3±0.2 Step 3 : Remove the 4 screws. M3*5L(BNI) 3±0.2 Step 4 : Use the plastic blade to pry the back cover. Remove Remove Start... - Page 9 Cables Disassembly Notice Step 1 : Disconnect the backlight cable. Step 2 : Disconnect the touch cable. Then detach the conductive tape and unroute the cable from the cable guide. Step 3 : Disconnect the camera cable. Then detach the conductive tape and unroute the cable from the cable guide.
-
Page 10: Camera Module
Camera Module Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Detach the camera conductive tape. Then unroute the camera M3*5L(BNI) 3±0.2 cable, remove the 2 screws, and remove the camera assembly. Step 2 : Disconnect the camera cable. Step 3 : Remove the camera module. Step 4 : Remove the microphone rubbers. -
Page 11: Main Frame And Front Decobar
Main Frame and Front Decobar Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the 19 screws. Then remove the main frame. M3*5L(BNI) 3 ±0.2 Step 2 : Remove the front decobar. Assembly Notice Before installing the main frame, make sure to route the Remove cable through the cable guide and attach the conductive tape. -
Page 12: Cables
Cables Disassembly Notice (Touch SKU) Disassembly Notice (Non-Touch SKU) Step 1 : Disconnect the touch cable. Step 1 : Detach the tape and disconnect the backlight cable. Step 2 : Detach the tape and disconnect the backlight cable. Detach and Disconnect Detach and Disconnect Disconnect Assembly Notice... -
Page 13: Stand
Stand Disassembly Notice Screws Spec Torque (kgf-cm) M4*7L(BNI) 8±0.2 Step 1 : Remove the 7 screws. Then remove the stand. Remove Back... -
Page 14: Mainboard Cover
Mainboard Cover Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the 10 screws. Then remove the mainboard cover. M3*5L(BNI) 3±0.2 Remove Back... -
Page 15: Lvds Ffc
LVDS FFC Disassembly Notice Step 1 : Disconnect the LVDS FFC. Disconnect Back... -
Page 16: Ddr Modules
DDR Modules Disassembly Notice Step 1 : Release the latches. Step 2 : Remove the DDR shielding. Step 3 : Push the clips outwards and pull to disconnect the modules. Release Remove Push and Disconnect Back... -
Page 17: Fan
Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Disconnect the fan cable. M2*4L(BNI) 2.5±0.2 Step 2 : Remove the screw. Then slide to release the fan and remove. Assembly Notice Disconnect Remove Please use the correct technique to remove the fan to avoid getting out of shape. -
Page 18: Hdd Module (Hdd Sku)
HDD Module (HDD SKU) Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the 2 screws. Step 2 : Disconnect the HDD module assembly. (HDD module) M3*5L(BNI) 3 ±0.2 Step 3 : Remove the 4 screws. Step 4 : Separate the HDD module and the HDD bracket. (HDD bracket) Step 5 : Detach the aluminium foil and remove. -
Page 19: Thermal Module
Thermal Module Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Loosen the 4 screws (in sequence order: 4→3→2→1). Can’t be Step 2 : Remove the thermal module. removed Assembly Notice • After replacing the new mainboard, please clean the remaining CPU and GPU thermal pad on the thermal module, and then paste new one. -
Page 20: Wlan Module
WLAN Module Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Detach the WLAN conductive tape. M2*4L(BNI) 2.5±0.2 Step 2 : Disconnect the WLAN antenna cables. Step 3 : Remove the screw. Then remove the WLAN module. Assembly Notice Connect the MAIN antenna cable to the connector closer to Disconnect Remove the screw and the AUX antenna cable to another connector... -
Page 21: Io Board
IO Board Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Disconnect the IO FFC. Then detach the conductive tape. M2*4L(BNI) 2.5±0.2 Step 2 : Remove the 3 screws. Then remove the IO board. Step 3 : Remove the IO gasket and the IO sponge. Step 4 : Detach the mylar and disconnect the IO FFC. -
Page 22: Speaker
Speaker Disassembly Notice Step 1 : Disconnect the speaker cable. Step 2 : Remove the speaker. Disconnect Remove Back... -
Page 23: Mainboard
Mainboard Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the 9 screws. Then remove the mainboard. M2*4L(BNI) 2.5±0.2 Step 2 : Detach the mainboard fan sponge. Remove Detach Back... -
Page 24: Ssd Module
SSD Module Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the screw. M2*4L(BNI) 2.5±0.2 Step 2 : Disconnect the SSD assembly. Step 3 : Detach the SSD pad. Remove Disconnect Detach Back... - Page 25 Button Cell Disassembly Notice Step 1 : Remove the button cell. Remove Back...
- Page 26 Mainboard Shielding Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the 2 screws. Then remove the mainboard shielding. M2*4L(BNI) 2.5±0.2 M3*3.5L(BNi) 3±0.2 Remove Back...
- Page 27 Hinge Module Disassembly Notice Screws Spec Torque (kgf-cm) Step 1 : Remove the 14 screws. Then remove the hinge module. M3*3.5L(BNi) 3±0.2 Remove Back...
- Page 28 WLAN Antennas Disassembly Notice Assembly Notice Step 1 : Unroute the WLAN MAIN antenna cable from the cable guides. When installing the WLAN antennas, ensure that theWLAN Step 2 : Detach the WLAN MAIN antenna. MAIN antenna cable (marked with red color) and WLAN AUX Step 3 : Unroute the WLAN AUX antenna cable from the cable guides.
Need help?
Do you have a question about the AIO M3700WUA and is the answer not in the manual?
Questions and answers