Turn It On & Off - Motorola MOTOPEBL Manual

several seconds to start charging the battery.
The battery charge indicator light shows when
the battery is charging. The display shows
Charge Complete when finished.
Tip: Relax, you can't overcharge your battery.
It will perform best after you fully charge and
discharge it a few times.
Note: You can charge your battery
by connecting a cable from your
phone's mini-USB port to a USB
port on a computer. Both your
phone and the computer must be turned on,
and your computer must have the correct
software drivers installed. Cables and
software drivers are available in
Motorola Original data kits, sold separately.
turn it on & off
Caution: Your phone may prompt you to enter
your SIM card PIN code when you turn it on. If
you enter an incorrect PIN code three times
before the correct code, your SIM card is
disabled and your display shows SIM Blocked.
Contact your service provider.
To turn on your phone,
press and hold the
power key u for a
few seconds or until
the display lights up. If
prompted, enter your
eight-digit SIM card
PIN code and/or four-digit unlock code.
To turn off your phone, press and hold u for
two seconds.
essentials 15