Kelvin Epos 600 User Manual page 24

HSI
Hue, saturation and
intensity
www.kelvinlight.com
• Turn the middle knob to adjust the color temperature.
• Turn the right knob to adjust the tint.
•
Press the right knob to reset the tint to neutral (0.0).
Touch control
•
Sliders adjust the color temperature and tint.
• Range button (above CCT slider) toggles between regular
and extended color temperature range.
•
Preset buttons (below the CCT slider) set the color
temperature to preset temperature points.
• Neutral button (next to the tint slider) resets the tint point to
neutral (0.0 Δuv).
HSI mode is used for setting the light output with hue and
saturation. The white point of the HSI mode can be set to either
standardized color spaces (S RGB, Adobe 1988, Adobe Wide or Pro
Photo) or to the color space of the Epos 600 (Device). When
color space is selected, the white point can be further adjusted.
Knob control
•
Turn the middle knob to adjust the hue in degrees (0
and loop back around if the endpoints are exceeded.
• Press the right knob to toggle between adjusting the saturation
or the white point (only if device color space is selected).
Parameter labels turn yellow to indicate which parameter is
selected for adjustment.
• Turn the right knob to adjust the saturation (by default) or the
white point if selected.
Touch control
• Pressing/dragging the HSI color map adjusts the hue
device
-360 )
O O
24