Advertisement

Quick Links

Copyright
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any of the material contained herein, may be reproduced without written consent of
the author.
Version 1.0
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof
and specifically disclaims any implied warranties of merchantability or fitness for
any particular purpose. The manufacturer reserves the right to revise this publica-
tion and to make changes from time to time in the content hereof without obligation
of the manufacturer to notify any person of such revision or changes.
Trademark Recognition
®
Windows
10/8.1/7 are registered trademarks of Microsoft Corp.
Other product names used in this manual are the properties of their respective owners
and are acknowledged.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits govern-
ing this device. Changes or modifications not expressly approved by the system's
manufacturer could void the user's authority to operate the equipment.
A320AM4-M3(D) USER MANUAL
Preface

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A320AM4-M3 and is the answer not in the manual?

Questions and answers

Summary of Contents for ECS ELITEGROUP A320AM4-M3

  • Page 1 Shielded interconnect cables and a shielded AC power cable must be employed with this equipment to ensure compliance with the pertinent RF emission limits govern- ing this device. Changes or modifications not expressly approved by the system’s manufacturer could void the user’s authority to operate the equipment. A320AM4-M3(D) USER MANUAL...
  • Page 2 Describes the motherboard Using the Motherboard Software software. Chapter 5  page 71 Provides information about Setting up AMD A320 RAID SATA RAID Setup Configuration  Chapter 6 page 79 Provides basic trouble Trouble Shooting shooting tips. A320AM4-M3(D) USER MANUAL...
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Preface Chapter 1 Introducing the Motherboard Introduction...................1 Pakage Contents................1 Specifications................2 Motherboard Components............4 I/O Ports....................6 Chapter 2 Installing the Motherboard Safety Precautions................9 Installing the Motherboard in a Chassis........9 Checking Jumper Settings...............10 Installing Hardware..............11 Installing the Processor............11 Installing the CPU Cooler............12 Installing Memory Modules............13 Installing Add-on Cards............14 Connecting Optional Devices..........17...
  • Page 4 Updating the BIOS................65 Chapter 4 Using the Motherboard Software Auto-installing under Windows 10/7..........67 ..Running Setup..............67 Manual Installation................69 ECS Utility Software (Intelligent EZ Utility)........69 Chapter 5 Setting Up AMD B350 RAID Configuration Setting Up a Bootable RAID Array............71 Chapter 6 Trouble Shooting Start up problems during assembly..........79 Start up problems after prolong use..........80...
  • Page 5: Introducing The Motherboard

    PS/2 mouse connector, one PS/2 keyboard connector, one VGA port, one DVD-D port (A320AM4-M3 only), one HDMI port, four USB 3.0 ports, two USB 2.0 ports, one RJ45 LAN connector, and three audio jacks for microphone, line-in and line-out.
  • Page 6: Specifications

    • 1 x PS/2 keyboard and PS/2 mouse connectors Rear Panel I/O • 1 x VGA port • 1 x DVI-D port (A320AM4-M3 only) • 1 x HDMI port • 2 x USB 2.0 ports • 4 x USB 3.0 ports •...
  • Page 7 - Supports BIOS parameters copied to the flash disk - Supports Pgup clear CMOS Hotkey (PS2 KB Model only) AP Support • Supports eBLU*/eDLU/eSF* Note: *Microsoft .NET Framework 3.5 is required. Form Factor • Micro-ATX Size, 220mm x 205mm A320AM4-M3(D) USER MANUAL...
  • Page 8: Motherboard Components

    Motherboard Components A320AM4-M3(D) USER MANUAL...
  • Page 9 ® 1. CPU Socket AM4 CPU Socket 2. CPU_FAN 4-pin CPU cooling fan connector 3. RGB_HEADER RGB header (A320AM4-M3 only) 4. DIMM_1~2 288-pin DDR4 Module slots 5. ATX_POWER Standard 24-pin ATX power connector 6. F_USB1~2 10-pin Front Panel USB 2.0 headers 7.
  • Page 10: I/O Ports

    7. LAN Port Connect an RJ-45 jack to the LAN port to connect your computer to the Network. Link LED LAN LED Status Description No data Activity LED Orange blinking Active No link Link LED Green Link LAN Port A320AM4-M3(D) USER MANUAL...
  • Page 11 It can be connected to an external CD/DVD player, Tape player or other audio devices for audio input. 10. Line-out(lime) It is used to connect to speakers or headphones. 11. Microphone(pink) It is used to connect to a microphone. A320AM4-M3(D) USER MANUAL...
  • Page 12 Memo A320AM4-M3(D) USER MANUAL...
  • Page 13: Installing The Motherboard

    Place the motherboard over the mounting brackets and secure the motherboard onto the mounting brackets with screws. Do not over-tighten the screws as this can stress the motherboard. A320AM4-M3(D) USER MANUAL...
  • Page 14: Checking Jumper Settings

    The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. To avoid the system instability after clearing CMOS, we recommend users to enter the main BIOS setting page to “Load Default Settings” and then “Save and Exit Setup”. A320AM4-M3(D) USER MANUAL...
  • Page 15: Installing Hardware

    Pull up the lever away from the socket and lift up to 90-degree angle. Locate the CPU cut edge (the corner with the pin hold noticeably missing). Align and insert the CPU correctly. Press the metal lever back into its original position. A320AM4-M3(D) USER MANUAL...
  • Page 16: Installing The Cpu Cooler

    CPU, and make it to be a thin layer. B. Put the CPU Fan down on the retention module and flip the levers over the heat sink in place. C. Connect the CPU cooler power connector to the CPU_FAN connector. A320AM4-M3(D) USER MANUAL...
  • Page 17: Installing Memory Modules

    The slot latche is levered upwards and latch on to the edges of the DIMM. * For reference only We suggest users not to mix memory type. It is recommended to use the same brand and type memory on this motherboard. A320AM4-M3(D) USER MANUAL...
  • Page 18: Installing Add-On Cards

    This is M.2 slot, socket 3 key M 2242/2260/2280 supports SSD (PCIE). Before installing an add-on card, check the documentation for the card carefully. If the card is not Plug and Play, you may have to manually configure the card before installation. A320AM4-M3(D) USER MANUAL...
  • Page 19 Please refer the following illustrations to install the add-on card: Install the VGA Card in the PCIEX16 slot Install the LAN Card in the PCIEX1 slot A320AM4-M3(D) USER MANUAL...
  • Page 20 Demount the screw not used according to the length of your M.2 SSD card. Insert the M.2 SSD card into M2 slot in the fool-proof way. Lock the screw as the following picture shows to make sure the M.2 SSD card is installed in place. A320AM4-M3(D) USER MANUAL...
  • Page 21: Connecting Optional Devices

    2-4-5. Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: Components Components RGB_HEADER USB3F F_USB1~2 SATA3_1~4 F_AUDIO 1. RGB: RGB Header (A320AM4-M3 only) A320AM4-M3(D) USER MANUAL...
  • Page 22 SATA3_1~4 connectors are used to support the Serial ATA 6Gb/s device, simpler disk drive cabling and easier PC assembly. It eliminates limitations of the current Parallel ATA interface. But maintains register compatibility and software compatibility with Parallel ATA. A320AM4-M3(D) USER MANUAL...
  • Page 23 Please make sure that the USB cable has the same pin assignment as indicated above. A different pin assignment may cause damage or system hang-up. 5. COM: Onboard Serial Port Header Connect a serial port extension bracket to this header to add a serial port to your system. A320AM4-M3(D) USER MANUAL...
  • Page 24 The front panel audio header allows the user to install auxiliary front-oriented microphone and line-out ports for easier access. This header supports HD audio by default. If you want connect an AC’ 97 front panel audio to HD onboard headers, please set as below picture. A320AM4-M3(D) USER MANUAL...
  • Page 25: Installing A Sata Hard Drive

    Attach either cable end to the connector on the motherboard. Attach the other cable end to the SATA hard drive. Attach the SATA power cable to the SATA hard drive and connect the other end to the power supply. * For reference only A320AM4-M3(D) USER MANUAL...
  • Page 26: Connecting Case Components

    FAN Power Connector) Connect the CPU cooling fan cable to CPU_FAN. Connect the system cooling fan connector to SYS_FAN. Users please note that the fan connector supports the CPU cooling fan of 1.1A ~ 2.2A (26.4W max) at +12V. A320AM4-M3(D) USER MANUAL...
  • Page 27 24-pin power cable Connecting 4-pin power cable The ATX_12V power connector is used to provide power to the CPU. When installing 4-pin power cable, the latches of power cable and the ATX_12V match perfectly. 4-pin power cable A320AM4-M3(D) USER MANUAL...
  • Page 28: Front Panel Header

    3. BZ: Buzzer Header 4. F_PANEL: Front Panel Header The front panel header (F_PANEL) provides a standard set of switch and LED headers commonly found on ATX or Micro ATX cases. Refer to the table below for information: A320AM4-M3(D) USER MANUAL...
  • Page 29 50 ms to signal the power supply to switch on or off. The time requirement is due to internal de-bounce circuitry. After receiving a power on/off signal, at least two seconds elapses before the power supply recognizes another on/off signal. This concludes Chapter 2. The next chapter covers the BIOS. A320AM4-M3(D) USER MANUAL...
  • Page 30 Memo A320AM4-M3(D) USER MANUAL...
  • Page 31: Using Bios

    When you power on the system, BIOS enters the Power-On Self Test (POST) routines. POST is a series of built-in diagnostics performed by the BIOS. After the POST routines are completed, the following message appears: Press DEL to enter SETUP A320AM4-M3(D) USER MANUAL...
  • Page 32: Resetting The Default Cmos Values

    Wrong” message. This standard message will appear following a clear CMOS data at factory by the manufacturer. You simply need to Load Default Settings to reset the default CMOS values. Note: Changes to system hardware such as different CPU, memories, etc. may also trigger this message. A320AM4-M3(D) USER MANUAL...
  • Page 33: Using Bios

    BIOS setup screens shown in this chapter are for reference only and may differ from the actual BIOS. Please visit the manufacture’s website for updated manual. 2. In this Gui BIOS, you can operate by mouse or keyboard. Click : select item; Double click: enter; Right click: exit. A320AM4-M3(D) USER MANUAL...
  • Page 34 Select the advanced icon and press <Enter> or double click the left key of the mouse to display the screen. Exit Select the exit icon and press <Enter> or double click the left key of the mouse to display the screen. A320AM4-M3(D) USER MANUAL...
  • Page 35: Main Menu

    The Date and Time items show the current date and time on the computer. If you are running a Windows OS, these items are automatically updated whenever you make changes to the Windows Date and Time Properties utility. A320AM4-M3(D) USER MANUAL...
  • Page 36: Advanced Menu

    F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Onboard LAN Controller (Enabled) Use this item to enable or disable Onboard LAN controller. Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 37 F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Smart Fan Select (CPU Fan 1) This item allows you to change and configure Smart Fans on M/B. ex. CPU Fan1, System Fan1. A320AM4-M3(D) USER MANUAL...
  • Page 38 CPU & DIMM voltage, CPU & System fan speed...etc. • CPU Tct1 • System Temperature • CPU Fan 1 Speed • System Fan 1 Speed • Core Voltage • DIMM Voltage • +12V Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 39 EUP Function (Enabled) This item allows user to enable or disable EUP support. Power LED Type (Dual Color LED) This item shows the type of the Power LED. Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 40 F4: Save & Exit ESC/Right Click: Exit ACPI Sleep State [S3(Suspend to RAM)] This item allows user to enter the ACPI S3 (Suspend to RAM) Sleep State (default). Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 41 AMD C&Q Enabled ESC/Right Click: Exit Socket0: AMD A8-9600 RADEON R7, 10 COMPUTE CORES 4C+6G 4 Core(s) Running @ 3129 MHz 1125 mV This is display-only field and displays the information of the CPU installed in your computer. A320AM4-M3(D) USER MANUAL...
  • Page 42 Use this item to select the AMD Turbo Core: Auto/Disabled. AMD C&Q (Enabled) Use this item to enable or disable the CPU C&Q Function. This is for AMD Ryzen Processor. Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 43 SATA Port 1~4 (Not Present/TOSHIBA Q300. (120.0GB)) This motherboard supports four SATA channels, each channel allows one SATA device to be installed. Use these items to configure each device on the SATA channel. Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 44  /Click: Select Item Enter/Dbl Click : Select +/- : Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 45  /Click: Select Item Enter/Dbl Click : Select +/- : Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 46 This item shows the information of the device settings. Change Settings (Auto) Use this item to change device settings. Press <Esc> to return to the Super IO Configuration page. Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 47 Schedule an Operation for the Security Device. NOTE: Your Computer will reboot during restart in order to change State of Security Device. Platform Hierarchy (Enabled) Use this item to enable or disable the platform hierarchy. Storage Hierarchy (Enabled) Use this item to enable or disable the storage hierarchy. A320AM4-M3(D) USER MANUAL...
  • Page 48 TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated. Press <Esc> to return to the Advanced Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 49 F4: Save & Exit ESC/Right Click: Exit RedirectForReturnDis (Auto) Use this item to select the RedirectForReturnDis: Auto/1/0. From a workaround for GCC/C00005 issue for XV Core on CZ A0, setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14 [DecfgNoRdrctForReturns] to 1. A320AM4-M3(D) USER MANUAL...
  • Page 50 Operating your AMD processor outside of specification o Decline Accept  : Select Screen  /Click: Select Item Enter/Dbl Click : Select +/- : Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit A320AM4-M3(D) USER MANUAL...
  • Page 51 Disable - Part-specific EDC throttling protection enabled. Enable - Reduce the amount of time the processor will throttle. Auto-AMD’s recommendation (Disable). Press <Esc> to return to the Custom Pstates / Throttling page. Press <Esc> to return to the Zen Common Options page. A320AM4-M3(D) USER MANUAL...
  • Page 52 Power Cycle is required in order for future selections to take effect. Press <Esc> to return to the Core / Thread Enablement page. Press <Esc> to return to the Zen Common Options page. Press <Esc> to return to the AMD CBS page. A320AM4-M3(D) USER MANUAL...
  • Page 53 F4: Save & Exit ESC/Right Click: Exit Overclock (Auto) Use this item to set the Memory Overclock settings: Auto/Enabled. Press <Esc> to return to the DRAM Timing Configuration page. Press <Esc> to return to the DDR4 Common Options page. A320AM4-M3(D) USER MANUAL...
  • Page 54 Use this item to enable or disable DDR power down mode. Press <Esc> to return to the DRAM Controller Configuration page. Cmd2T (Auto) Use this item to select the Cmd2T: 1T/2T/Auto. Select between 1T and 2T mode on ADDR/CMD. A320AM4-M3(D) USER MANUAL...
  • Page 55 CAD Bus Drive Strength User Controls (Auto) Use this item to select the CAD Bus Drive Strength User Controls: Auto/Manual. Drive Strength on CAD bus signals to Auto or Manul. Press <Esc> to return to the DDR4 Common Options page. A320AM4-M3(D) USER MANUAL...
  • Page 56 F4: Save & Exit ESC/Right Click: Exit Data Bus Configuration User Controls (Auto) Use this item to specify the mode for drive strength to Auto or Manual. Press <Esc> to return to the DDR4 Common Options page. A320AM4-M3(D) USER MANUAL...
  • Page 57 F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit TSME (Auto) Use this item to select the TSME: Disabled/Enabled/Auto. Transparent SME: Addr TweakEn = 1; ForceEncrEn = 1; DataEncrEn = 0. ForceEncrEn = 1; DataEnc A320AM4-M3(D) USER MANUAL...
  • Page 58 Use this item to select the Address Hash Bank: Disable/Enabled/Auto. Enable or disable bank address hashing. Address Hash CS (Auto) Use this item to select the Address Hash CS: Disable/Enabled/Auto. Enable or disable CS address hashing. Press <Esc> to return to the UMC Common Options page. A320AM4-M3(D) USER MANUAL...
  • Page 59 /Click: Select Item Enter/Dbl Click : Select +/- : Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Press <Esc> to return to the UMC Common Options page. A320AM4-M3(D) USER MANUAL...
  • Page 60 Enter/Dbl Click : Select +/- : Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Primary Video Adaptor (Int Graphics (IGD)) This item shows the information of primary video adaptor. A320AM4-M3(D) USER MANUAL...
  • Page 61: Chipset Menu

    Use this item to select the UMA frame buffer size: 32M/64M/128M/256M/512M/ 1G/2G/Auto. Dual Monitor (Disabled)* Use this item to enable or disable the dual monitor. These are for AMD 7 Gen A-series Processor. Press <Esc> to return to the M.I.B. X Menu page. A320AM4-M3(D) USER MANUAL...
  • Page 62 Restore AC Power Loss (Power Off) This item enables your computer to automatically restart or return to its operating status. Azalia Internal HDMI Codec (Enabled) Use this item to enable or disable the Azalia Internal HDMI Codec. A320AM4-M3(D) USER MANUAL...
  • Page 63: Menu

    Enter/Dbl Click : Select +/- : Change Opt. Memory Clock Control Auto F1: General Help Memory Clock Speed Auto F2: Previous Values Auto F3: Optimized Defaults Trcdrd Auto F4: Save & Exit Trcdwr Auto ESC/Right Click: Exit Auto Tras Auto A320AM4-M3(D) USER MANUAL...
  • Page 64 Use this item to set the RAS# Active to CAS# read delay: 8 - 27Clk/Auto. Trcdwr (Auto)* Use this item to set the RAS# Active to CAS# write delay: 8 - 27Clk/Auto. (Auto)* Use this item to specify the row precharge time: 8 - 27Clk/Auto. A320AM4-M3(D) USER MANUAL...
  • Page 65: Security Menu

    Secure Boot (Enabled) This item is used to control the secure boot flow, it is possible only if system runs in User Mode. Secure Boot Mode (Standard) This item is used to select the secure boot mode. A320AM4-M3(D) USER MANUAL...
  • Page 66: Boot Menu

    If you select Full Initial, all USB devices will be available in OS and POST. Network Stack Driver Support (Disabled) If disabled, Network stack driver will be skipped. Bootup NumLock State (On) This item enables you to select NumLock state. Quiet Boot (Enabled) This item enables or disables quiet boot. A320AM4-M3(D) USER MANUAL...
  • Page 67 Enter/Dbl Click : Select +/- : Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Boot Option#1 (UEFI: USB, Partition 1) Use this item to set the system boot order. A320AM4-M3(D) USER MANUAL...
  • Page 68: Exit Menu

    This item enables you to save the changes that you have made as user defaults. Restore User Defaults This item enables you to restore the user defaults. Boot Override Use this item to select the boot device. A320AM4-M3(D) USER MANUAL...
  • Page 69: Updating The Bios

    BIOS jumper, reset the jumper to protect the newly installed BIOS from being overwritten. The computer will restart automatically. This concludes Chapter 3. Refer to the next chapter for information on the software supplied with the motherboard. A320AM4-M3(D) USER MANUAL...
  • Page 70 Memo A320AM4-M3(D) USER MANUAL...
  • Page 71: Using The Motherboard Software

    Click Setup. The installation program begins: The following screens are examples only. The screens and driver lists will be different according to the motherboard you are installing. The motherboard identification is located in the upper left-hand corner. A320AM4-M3(D) USER MANUAL...
  • Page 72 Windows 10 will show the following screen after system restart, you must select “Desktop” in the bottom left to install the next driver. A320AM4-M3(D) USER MANUAL...
  • Page 73: Manual Installation

    ECS Intelligent EZ Utility provides friendly interfaces under Windows O.S, which makes your computing more easily and conveniently. These software(s) are subject to change at anytime without prior notice. Please refer to the support disk for available software. A320AM4-M3(D) USER MANUAL...
  • Page 74 Just select the one you prefer and start to download and install the drivers. eBLU ECS eBLU utility makes BIOS update faster and easier. eBLU will list the latest BIOS with a default check-mark. Click”install” button to install. Microsoft .NET Framework 3.5 is required. A320AM4-M3(D) USER MANUAL...
  • Page 75: Setting Up Amd B350 Raid Configuration

    Enter/Dbl Click : Select SATA Port3 Not Present +/- : Change Opt. SATA Port4 Not Present F1: General Help NVMe Configuration F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC/Right Click: Exit Figure 1.2 SATA Configuration Screen A320AM4-M3(D) USER MANUAL...
  • Page 76 FastBuild (tm) Utility (c) 2006 ATI Technology, Inc. [ Main Menu ] View Drive Assignments....[ 1 ] Define LD..........[ 2 ] Define LD..........[ 3 ] Controller Configuration....[ 4 ] [ Keys Available ] Press 1..4 to Select Option [ESC] Exit Figure 1.3 Main Menu A320AM4-M3(D) USER MANUAL...
  • Page 77 Stripe block size is given in kilobytes, and affects how data is arranged on the disk. It is recommended to leave this value at the default Optimal, which is 64KB, but the values can be 64 KB and 128 KB. When choose RAID 1, the Stripe block size is unchangeable. A320AM4-M3(D) USER MANUAL...
  • Page 78 ---- LD 8 ---- ---- ------ ---- [ Keys Available ] [     ] Up [     ] Down [ESC] Exit [Space] Change Option [Ctrl-Y] Save Figure 1.6 Define LD Menu A320AM4-M3(D) USER MANUAL...
  • Page 79 The following screen appears (Figure 1.8). RAID BIOS Version 2.5.1540.33 (c) 2006 ATI Technology, Inc. All rights reserved. Mode Size TRACK-MAPPING STATUS 2+0 RAID 0 318000M 38661/255/63 Functional ASUS DVD-E818AT Press <Ctrl-F> to enter FastBuild (tm) Utility..._ Figure 1.8 A320AM4-M3(D) USER MANUAL...
  • Page 80 * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Devices ENTER=Continue F3=Exit Figure 1.10 Windows Setup—Specify Devices Specify the AMD drivers. A320AM4-M3(D) USER MANUAL...
  • Page 81 Note: Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed under Windows once for that hard drive. After that, the driver will not have to be installed. A320AM4-M3(D) USER MANUAL...
  • Page 82 Memo A320AM4-M3(D) USER MANUAL...
  • Page 83: Trouble Shooting

    1. The CPU may experience overheating so it will shutdown to protect itself. Apply the thermal grease onto the CPU heatsink & ensure the CPU fan is well-connected with the CPU heatsink. Check if the CPU fan is working properly while the system is running. A320AM4-M3(D) USER MANUAL...
  • Page 84: Start Up Problems After Prolong Use

    6. If possible, ensure the power cord has an earth ground pin directly from the wall outlet. This will reduce voltage fluctuation that may damage sensitive devices. A320AM4-M3(D) USER MANUAL...
  • Page 86 Memo A320AM4-M3(D) USER MANUAL...

This manual is also suitable for:

A320am4-m3d

Table of Contents

Save PDF