Helpful Hints-Problems And Solutions - Eiki LC-180 Owner's Instruction Manual

HELPFUL HINTS-Problems and-Solutions
Check the following chan before requesting service.
Try
these Solutions:
• Plug the projector into an AC outlet.
• Turn the MAINS ON/OFF switch to ON.
• Press me POWER (LAMP) ON/OFF button to ON.
• Check the READY INDICATOR light ON.
• One minute has not passed after the projector turned OFF.
NOTE:
After pressing the POWER (LAMP) ON/OFF button to
OFF . me projector functions as follows.
1. The READY indicator will turn off.
2. The cooling fan will operate for 50 seconds after me
projector is turned off and POWER indicator will light bright.
(During mis "cooling down period, the projector can not be
turned on.)
3. After 10 seconds, me READY indicator will light green
again and the projector may be turned on by pressing the
POWER (LAMP) ON/OFF button.
No sound from built-in speaker
• Press the VOLUME (▲) and (T) to (A).
• Check audio cable connection from audio input source.
Picture is Inverted
• Check REVERSE SCAN (T/B) Feature.
Picture blurred or color faded
• Check the projection distance 4.9* (1.5 m) - 26.2 (8.0 m).
• Adjust the FOCUS control.
NOTE:
Moving the projector from a cool temperature location
to a warm temperature location may result in moisture
condensation on the lens. In such an event, leave the
projector OFF and wait until condensation disappears.
17