Atlas 70312 Owner's Manual & Safety Instructions

Brushless cordless cultivator

Hide thumbs

Table Of Contents

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

BRUSHLESS

10" CORDLESS CULTIVATOR

80V

LITHIUM

email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2023 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Battery and charger sold separately

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

23k

70312

Table of Contents

Need help?

Do you have a question about the 70312 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atlas 70312

Page 1 10" CORDLESS CULTIVATOR LITHIUM Battery and charger sold separately Visit our website at: http://www.harborfreight.com 70312 email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Page 2: Table Of Contents
Wear thick jeans and steel-toed work boots to help prevent injury 5. use Safety Glasses - Always use face caused by flying debris. or dust mask if operation is dusty. Page 2 For technical questions, please call 1-888-866-5797. Item 70312...
Page 3 8. Do not expose a battery pack or power tool to fire packs may create a risk of injury and fire. or excessive temperature. Exposure to fire or temperature above 140°F may cause explosion. Item 70312 For technical questions, please call 1-888-866-5797. Page 3...
Page 4 WiLL Vent Fire Or to its Charger’s instructions. eXpLODe iF MiStreateD: 4. Inspect Battery Pack before every use; 1. Keep Battery pack dry. do not use or charge if damaged. Page 4 For technical questions, please call 1-888-866-5797. Item 70312...
Page 5: Safety
10. Never operate the Cultivator without good visibility These carry important safety information. or light. Operate machine only in daylight. If unreadable or missing, contact Harbor Freight Tools for a replacement. SaVe tHeSe inStructiOnS. Item 70312 For technical questions, please call 1-888-866-5797. Page 5...
Page 6: Specifications
Charge on fireproof surface only. Specifications Electrical Rating 80 V DC Battery Type Atlas Li-ion 57014 or 58958 (sold separately) Charger Type Atlas Li-ion 56993 or 56997 (sold separately) Maximum Cultivating Depth 5 Inches Maximum Cultivating Width 10 Inches Page 6 For technical questions, please call 1-888-866-5797.
Page 7: Setup
Setup - Before use: components and controls Bail control power Switch upper Handle Battery compartment Middle Handle Lower Handle Wheel assembly tines Item 70312 For technical questions, please call 1-888-866-5797. Page 7...
Page 8 Use lower hole to increase cultivating depth. b. Use higher hole to decrease cultivating depth. Support Support Bracket Bracket Highest hole: r-clip least Lowest hole: cultivating most depth cultivating depth clevis Wheel assembly Page 8 For technical questions, please call 1-888-866-5797. Item 70312...
Page 9 Gearbox with sleeve on Tine facing away from Gearbox. 3. Insert Linch Pins (17) into inner holes on each side of Tine Shaft to secure Tines in place. Item 70312 For technical questions, please call 1-888-866-5797. Page 9...
Page 10 Bolts (4). Tighten securely. 2. Connect Upper Handle (1) to Middle Handle using two Handle Knobs and Handle Knob Bolts. Tighten securely. Handle Knob Middle Handle Handle Knob Bolt Handle Knob Lower Handle Page 10 For technical questions, please call 1-888-866-5797. Item 70312...
Page 11 Close Battery Door. 2. To remove: Press Battery Pack Release Button and pull Battery Pack out of battery compartment. Close Battery Door. Item 70312 For technical questions, please call 1-888-866-5797. Page 11...
Page 12: Operation
4. When Cultivator has started, release Power Switch. Battery Pack, then clean and store tool according to Cleaning, Maintenance, 5. Grip the Handle firmly with both hands. and Lubrication on page 13. power Switch Bail control Page 12 For technical questions, please call 1-888-866-5797. Item 70312...
Page 13: Maintenance
Remove Battery Pack and allow stops during Thermal overload protection has tripped. Cultivator to cool at least 15 minutes. use. Follow all safety precautions whenever diagnosing or servicing the equipment. Item 70312 For technical questions, please call 1-888-866-5797. Page 13...
Page 14: Parts Lists And Diagrams
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175495723 when ordering parts. Page 14 For technical questions, please call 1-888-866-5797. Item 70312...
Page 15 Diagram 44 45 Item 70312 For technical questions, please call 1-888-866-5797. Page 15...
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.