Summary of Contents for VADO PHOTON PHO-100FW/CC-CP
Page 1
Mono basin mixer with universal waste PHO-100FW/CC-CP PHO-100FW/SB-CP This instruction booklet covers these models: PHO-100FW/CC-CP, PHO-100FW/SB-CP Vado Wedmore Road, Cheddar, Somerset, England BS27 3EB tel 01934 744466 fax 01934 744345 aftersales @ vado.com www.vado.com Keep for future reference Version 1, 1-12-20...
Page 2
Important - please read Contents of Packaging Please read these instructions carefully before starting installation and keep for future reference. Remove all packaging and check the product for missing parts or damage before starting installation. Any alterations made to this product and fittings may infringe water regulations and will invalidate the guarantee.
Installation - Quick guide Installation Before installing your new mixer, flush PHO-100FW/CC-CP through the pipe work to ensure removal of debris, turn off the water supply. Ensure the seal is in place on the underside of the base. Position the mixer on the basin. From the underside of the basin screw the two flexible pipes to the hot and cold connections in the mixer body, the hot...
Page 5
Installation Notes: Only applies to the PHO-100FW/CC-CP. Plug Disassemble the push waste. Unscrew the plug from the waste flange. Remove the bolt from the waste flange and body. Hex key Slide the flange seal over the waste flange, and push the bolt down through the waste flange.
Need help?
Do you have a question about the PHOTON PHO-100FW/CC-CP and is the answer not in the manual?
Questions and answers