Related Manuals for CHANCEE XMD 50/50
Summary of Contents for CHANCEE XMD 50/50
- Page 1 Hand-push Floor Scrubber Operation Instruction XMD 50/50 It is strictly prohibited to use this equipment without reading this manual.
- Page 2 Preface Thank you for choosing Chancee cleaning equipment. We are confident in providing you with this product which is manufactured using the latest technology and has undergone strict quality control. This manual is used to help you understand the operation and maintenance of the equipment so that you can use it more comfortably and efficiently, so please read this manual thoroughly before using.
-
Page 4: Table Of Contents
Contents Chapter 1 Product Introduction .................................1 1.1 Applicable Scenarios ..................................1 1.2 Equipment Overview ..................................1 1.3 Control Panel/Buttons ...................................2 1.4 Technical parameters ..................................3 1.5 Accessories list ....................................3 1.6 Consumables and Optional Accessories..........................3 Chapter 2 Installation .....................................4 2.1 Unloading ......................................4 2.2 Installation ......................................4 2.2.1 Squeegee installation ................................ -
Page 5: Chapter 1 Product Introduction
Chapter 1 Product Introduction 1.1 Applicable Scenarios This equipment can be used in a variety of scenarios, including commercial and industrial places , such as hotels, schools, hospitals, industrial offices, supermarkets, office buildings, etc.; for epoxy floors, PVC floors, terrazzo, wear-resistant floors, tiles and cement floors , wooden floors, rubber floors, different floors can be cleaned with brush plates made of different materials. -
Page 6: Control Panel/Buttons
cover tank Brush plate Remove the brush plate from Clean water drain Drain the clean water tank remover the machine port Brush plate Brush and clean the floor Charging port For machine charging Avoid crash and damage the Sewage outlet Fender wheel Drain the sewage tank machine... -
Page 7: Technical Parameters
1.4 Technical parameters Name Manual Self propelled Name Manual Self propelled Brush plate motor Clean width（mm） power（W） Driving motor power Squeegee width（mm） （W） Continual working time （ h） Clean water tank（L） Theoretical working 2800 Sewage tank（L） efficiency（㎡/h） 24/80（maintenance-free） 24/100（maintenance-free） Battery capacity（V/Ah） Total weight（kg）... -
Page 8: Chapter 2 Installation
Chapter 2 Installation 2.1 Unloading Caution： Please remove the outer packaging carefully to avoid damaging the machine shell; It is recommended to keep the packaging boxes of related products after receiving the goods, so that the machine can be repackaged later when the equipment is moved or returned or exchanged; It is prohibited to violently unload the machine from the pallet to avoid damaging the parts;... - Page 9 Step 1：Lift the sewage tank and check whether the wire harness on the battery is connected and tightened； Step 2： Connect the disconnected battery poles in series. Note that the positive (+) port is red and the negative (-) port is black. After the connection is completed, put down the sewage tank.
-
Page 10: Chapter 3 Inspection Before Use
Chapter 3 Inspection before use 3.1 Check the battery After turning on the power key switch, the battery meter will display the current voltage of the battery. When the voltage is about 22V or there’s one last bar, please charge it in time. Caution：... -
Page 11: Chapter 4 Operation Instructions
Chapter 4 Operation instructions 4.1 Before operation Make sure the squeegee and sewage hose are installed correctly before operating the machine. Step 1：Fix squeegee with the cross knobs Step 2：Connect the sewage hose Caution： When the machine moving backward or transfer between application areas, turn off the suction button and lift the squeegee to prevent deformation of the rubber strips and squeegee sheet metal parts. -
Page 12: Sewage Draining
4.3 Sewage draining Step 1: Push the machine to a site that meets the sewage discharge standards, stop the machine and turn off the power; Step 2: Remove the sewage hose from the clamp at the rear of the machine, place it downwards, open the tube cove, and drain sewage. - Page 13 will drop. When the last two bars of the power meter are red, or the voltage is lower than 21V, it means that the power is insufficient and needs to be charged in time; · When maintaining the battery, please wear protective gloves to avoid contact with acidic substances of the battery; ·...
-
Page 14: Chapter 5 Cleaning And Maintenance
Chapter 5 Cleaning and maintenance Proper cleaning and maintenance will increase the service life of your machine, so please check and clean the machine regularly. 5.1 Cleaning . Check and clean the wheel set and remove entangled objects; . Clean the sewage tank and tubes regularly, and use water to flush the dirt in the tank and blockages in the tubes; . -
Page 15: 2Replacement And Installation Of Rubber Strips
5.2.2Replacement and installation of rubber strips Step 1：Park the machine on a flat ground, turn off the machine and make sure the machine is power off while replacing; Step 2：Rotate the plastic cross knob anti clockwise to loose the squeegee components; Step 3：Loosen the nut to remove the squeegee plate and front and back rubber strips. -
Page 16: Adjustment Of Squeegee
5.2.3 Adjustment of squeegee Step 1：Place the assembled squeegee on the flat ground, adjust the height of the universal wheels and make it 3-5mm higher than the bottom side of the rubber strips on both sides; Step 2：Connect the squeegee with the machine, turn on the scrubber function and drop the squeegee on the floor, then turn off the machine and check whether the squeegee is parallel to the floor;... -
Page 17: Chapter 6 Transportation And Storage
Chapter 6 Transportation and Storage 6.1 Transportation If the machine and the accessories need to be lifted, it is recommended that you put them on a pallet and lift them with a forklift. And water in both tanks must be emptied when transporting the machine; In order to prevent slipping and damage caused by collisions during transportation, please ensure that the binding should be firm and the center of gravity should be stable to ensure safety. -
Page 18: Chapter 7 Common Faults
Chapter 7 Common faults Fault Phenomenon/Part Troubleshooting Solution If the charger is not connected to the machine, see whether the green light Charger failure will be on. If the machine is plugged in, Replace the charger Charging the red light is on, and the built-in fan failure of the charger does not run Charging... - Page 19 1. Is there any abnormal sound when Resonance of rubber rubber strips lifted? Adjust the height of the squeegee strips sewage 2. Is there any obvious vibration in the universal wheels suction port water absorbing tube? Loud noise 1. Is there any abnormal sound when rubber strips lifted?
-
Page 20: Warranty Card
Warranty Card Client Name Telephone Mail address Bill No. Purchase time Machine Code Product model Date Replace accessories Faults description...
Need help?
Do you have a question about the XMD 50/50 and is the answer not in the manual?
Questions and answers