Appendix C Warning - AXIOMTEK iNA110 Series User Manual

iNA110 User's Manual
This is a class A Product. In a domestic environment this product may cause radio
⚫
interference in which case the user may be required to take adequate measures.
It will be danger if battery is incorrectly replaced. Replacing only with the same or
⚫
equivalent type is highly recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
Warning for Hard Disk Drive Selection:
⚫
TUV approved Hard Disk Drive is preferred for TUV compliance Hard Disk drive-Optional,
(NWGQ2), generic, Input Voltage rated 5V DC/1.0A, 12V DC/1.8A maximum. Minimum
clearance from uninsulated live parts 4.0 mm.
The system has to be installed in an environment with maximum ambient temperature
⚫
below 60C
The openings on the enclosure are for air convection, which helps protect the equipment
⚫
from overheating. DO NOT COVER THE OPENINGS.
Lay this equipment on a reliable surface when install. A drop or fall could cause damage.
⚫
The equipment shall be installed according to specification as the tag. Make sure the
⚫
voltage of the power source when connect the equipment to the power outlet.
The current of load and output power of loads shall be not over the specification.
⚫
This equipment must be connected to the reliable earthling before using.
⚫
Electric shock hazard inside the redundant power supply.
The exchange of modules shall be done by service person.
68
Appendix C
Warning
warning