FINAL FOR PRINT NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page i Friday, August 13, 2010 1:08 PM User Guide Wireless Blu-Ray Disc Player NS-WBRDVD2/NS-WBRDVD2-CA...
Disposal of your old appliance 15 To reduce the risk of fire or electric shock, do not 1. When this crossed-out wheeled bin symbol is attached to a expose this device to rain, moisture, dripping, or...
• JPEG picture files must be written to the disc • Easy and simple HDTV connection using a single with a .jpeg or .jpg file extension in order to be recognized and played back correctly. HDMI cable (cable not included).
Fast x 2, Plug the power cord into a power outlet. Power connector Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64, (fast reverse) Fast x 128. Press (play/pause) to resume normal Connect an ethernet cable to this jack and to a playback.
1 Remove the battery compartment cover. resolution” on page 13. Press to create a playback loop. For more information, see “Creating a playback loop on a DVD or audio CD” on page 11. During DVD playback, press to open the DVD root menu where you can select DVD playback options.
• An HDMI cable carries both video and audio. If you want to use TV speakers, you do not need to Note make an audio connection if you are using an HDMI cable. If you want to use an HDMI-capable...
This player can be connected to your wired network • Connect—Connect to this network. using the Ethernet port on the back of your player or • Disconnect—Disconnect from this network. by using a wireless network.
Page 11
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 7 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player Using a wired network provides the best 7 Press to select Network, then press performance, because the attached devices ENTER. connect directly to the network and are not 8 Press to select Wired, then press ENTER.
7 Select the Settings tab at the bottom of the button, the fast-forward speed changes in the screen, then press ENTER. following sequence: Fast x 2, x 4, x 8, x 16, x 32, 8 Select Activate and enter your activation code. x 64, x 128. Press (play/pause) to resume You can now rent movies using Cinemanow.
1 GB and be formatted as FAT32. For new Pandora customers: 5 If there is not at least 1 GB of free space on your 1 Select Pandora. player, try to select Clear BD Storage from the 2 Select I am new to Pandora from the options.
1 Press 2 Press to open the disc tray. 3 Place a CD on the disc tray with the label facing up, then press to close the disc tray. It may take a few seconds for the CD to load.
“Eng” (English) indicates the To repeat a title, chapter, or CD track: audio language. “Dolby Digital” describes the • To repeat a title or chapter, press REPEAT one or currently selected audio format. more times to select a repeat mode. You can 2 Press to select an audio mode.
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 12 Friday, August 13, 2010 1:08 PM NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player Using Quick Setup 4 Press to select the language you want, then press ENTER. You can select English, To use Quick Setup: French, or Spanish. 1 Press ENTER. The Settings menu opens.
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 13 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player Selecting the subtitle language Automatically determining the best HDMI resolution To select the subtitle language: To automatically determine the best HDMI resolution: 1 Press ENTER. The Settings menu opens.
Page 18
ENTER. Turning film mode on or off TV type Resolution Movies are recorded on film at a rate of 24 pictures (frames) per second. Many of the movies on Blu-ray If your TV is a high-definition TV HDMI Auto Discs are placed on the discs at this frame rate.
30 bits, if the 30 bits is not supported by the TV, the player will set the color depth to 24 bits. If Deep Color is set to Off, the player will set the color depth to 24 bits.
Dynamic range control for all Setting the parental control password BD movie soundtracks except Dolby TruHD. If you have selected a Dolby TruHD track on the BD disc, To input the parental control password: Auto tells the BD player to only turn on dynamic 1 Press ENTER.
Your player has a screen saver feature that turns the screen black when your player is inactive. You can set the amount of time you want your player to wait before activating the screen saver. To set the screen saver activation time: 1 Press ENTER.
HDMI, then press To set the BD-Live Internet access level: ENTER. 1 Press ENTER. The Settings menu opens. 5 Review the User Guide for your TV for CEC setup information. 6 Press to go to the previous menu.
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 19 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player • Prohibit Access—Never allows BD-Live 2 Press to select Network, then press Internet access. ENTER. 5 Press to go to the previous menu. 3 Press to select Wired, then press ENTER.
Page 24
6 Press to go to the previous menu. password, then press ENTER. Repeat this step to enter the rest of the password. If you make a Configuring a wireless Internet connection mistake, use backspace key to delete the character.
Page 25
IP address. to press the button on your router. To test the network: 8 Press the button on top of your router. A screen 1 Press ENTER. The Settings menu opens. should appear on your TV that says “Success”...
4 After a short period of time, a screen similar to the one below appears. Press (red button) to install these updates Below, select OK to proceed with the update or Cancel to abort, then press the Enter key Player model INSIGNIA NS-WBRDVD2 BD Player Player current version: PKG_085 2 Press the red button to install the updates.
TV or Electrical disturbance sound system. If you place your player next to a radio, TV, or VCR, My television has COMPOSITE VIDEO HDMI provides the best video and the image may be poor and the sound may be IN, COMPONENT(YUV) IN and HDMI IN audio.
For instructions, see the outlet is supplying power. “Cleaning discs” on page 23. The player switches to standby mode After a period of inactivity, your player • The disc may be switches to standby mode incompatible with your automatically.
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 25 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player TV screen and video BD-Live and USB connections Problem Solution Problem Solution Video does not appear on the TV Cannot connect access BD-Live • Make sure that the TV is •...
• Maximum resolution size: 1920x1080 (W x H) • You must have a BD-Live disc in the player to play pixels any related (already downloaded) content. • File extensions: .wmv, .avi, .mp4, .mpeg (Note: •...
This equipment has been tested and found to comply within the worldwide patents issued & pending. DTS limits for a class B digital device, pursuant to Part 15 of the FCC and the Symbol are registered trademarks, and DTS-HD, DTS-HD Rules.
Program or any When we speak of free software, we are referring to freedom, not part thereof, to be licensed as a whole at no charge to all third price. Our General Public Licenses are designed to make sure parties under the terms of this License.
Page 33
(and charge for this service if you wish); that you receive License may add an explicit geographical distribution limitation source code or can get it if you want it; that you can change the excluding those countries, so that distribution is permitted only software and use pieces of it in new free programs;...
Page 34
For example, if you distribute copies of the library, whether gratis The “Library”, below, refers to any such software library or work or for a fee, you must give the recipients all the rights that we which has been distributed under these terms. A “work based gave you.
Page 35
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 31 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player This option is useful when you wish to copy part of the code of For an executable, the required form of the “work that uses the the Library into a program that is not a library.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
• Products sold as is or with all faults workmanship for a period of one (1) year from the date of your • Consumables, such as fuses or batteries purchase of the Product (“Warranty Period”).
Page 38
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 34 Friday, August 13, 2010 1:08 PM NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player www.insigniaproducts.com...
Page 39
NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 35 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player www.insigniaproducts.com...
Need help?
Do you have a question about the NS-WBRDVD2-CA and is the answer not in the manual?
Questions and answers