Vestfrost VLS 096A RF SDD Technical Manual page 19

5. Use a screwdriver to disconnect the
socket from compressor.
1. Dismount the 6 wires from ECU.
Grab the wire socket and pull gently.
3. Place a screwdriver in the small vent in
the plastic cover.
It´s the same procedure that needs to be
done for both devices.
The next 4 pictures is for the device the is
placed on the side
2. Loosen the screw a couple of turns.
4. Unclick plastic cover/starting device from
compressor bracket.
19
GB