Related Manuals for Rohnson R-1239
Summary of Contents for Rohnson R-1239
- Page 1 CORDED STICK VACUUM CLEANER 2 in 1 WITH MOTORIZED BRUSH Model：R-1239 INSTRUCTION MANUAL 220-240V~,50/60Hz, 700W max...
- Page 2 For your safety, please read this manual carefully before use. Improper operation may result in product damage or even personal injury. Please keep this manual properly for future use and maintenance. IMPORTANT 1. Read this instruction booklet carefully. 2. Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rating plate.
- Page 3 Do not run the appliance over the power cable. Do not obstruct the air intake or outlet vent. Precautionary Measures IMPORTANT: If the suction opening in the unit or the hose is blocked, switch off the vacuum cleaner and remove the blocking substance before you start the unit again. 1.
-
Page 4: Parts Description
PARTS DESCRIPTION 1. Power cord 2. Switch 3. Dust cup release button 4. Dust cup bottom release button 5. Suction part 6. Foldable tube 7. Floor brush 8. 2 in 1 small crevice nozzle 9. Soft roller (ideal for floors) 10. -
Page 5: Preparing Your Device
PREPARING YOUR DEVICE Attaching the crevice tool and the floor brush to the main body Push the crevice tool or floor brush into the suction hole opening. The following are recommendations for accessory usage: 2 in 1 small crevice nozzle and long crevice nozzle are suitable for radiators, crevices, corners, base-boards and between cushions. - Page 6 Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged. Power switch: • The On/Off power switch is at the same position. Push on the switch to turn the vacuum ON.
- Page 7 ⚫ Make sure that it is aligned correctly: the recesses in the large mount must point upwards. ⚫ Hook the hand-held appliance into the large attachment from above. Cleaning and changing the dust cup filter To ensure the best performance of your appliance, it is important to regularly clean the filters, the bin and check for blockages.
- Page 8 2. Rotate and pull out the dust cup filter. 3. Empty the dust from the dust cup container. 4. Rinse the dust cup filter in cold water and then let it air dry for 24 hours before replacing it back in the dust cup container. IMPORTANT: DO NOT use a washing machine to clean the dust cup filter.
-
Page 9: Troubleshooting & Solutions
Troubleshooting & Solutions If you find a problem while using the product, please review the key points and solutions in the following table first. If the problem still cannot be solved, please contact the after-sales service center for processing. WARNING: Please turn off the vacuum cleaner before maintenance, otherwise it may cause electric shock or other personal injury. - Page 10 IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Need help?
Do you have a question about the R-1239 and is the answer not in the manual?
Questions and answers