Network Setup - Hegel H400 User Manual

Network Setup

Connection
To be able to use the amplifier's network
and streaming features, the amplifier needs
to be connected to your local network.
Connect your Hegel amplifier using an Eth-
ernet cable (not supplied) from the network
connection (LAN - RJ45) port on the back of
the amplifier to your router.
First time setup
To enable all the network features on this
device, you need to download and install
the Hegel Control app. This can be found
on Apple App Store and Google Play. Once
installed, please follow the instructions in
the app.
For detailed information on the
Hegel Control App, supported
formats, and much more, please
visit support.hegel.com.
NOTE: Some of the features of the Hegel
device require an internet connection.
Status Indicators
The Hegel device will display the network sta-
tus in the lower left corner of the display.
Network status
is OK:
Troubleshooting
If you experience problems with connecting
the amplifier to the network or have other
network issues, when powered on, press
and hold the device power button until
the device reboots.
disconnect the power chord for at least 30
seconds and then reconnect.
If that does not help,
11