Table of Contents
Related Manuals for Hawkeye Mfg 4K Thumb Cam 2 Gyroflow Smooth
Summary of Contents for Hawkeye Mfg 4K Thumb Cam 2 Gyroflow Smooth
- Page 1 www.CNfpv.com Hawkeye 4K Thumb Cam 2 Gyroflow Smooth Gyroflow Video Smooth Built in battery Wi-Fi AV output/Video trigger V3.0 Newst Manual: https://drive.google.com/file/d/1DTtlx1eGgTv_7EghYOsfUN_17E_0MGby/view?usp=sharing...
-
Page 2: Table Of Contents
www.CNfpv.com Contents Safety Guidelines： ......................3 Features： ........................4 Button:..........................4 LED indicator： ......................4 Wifi LED indicator: ......................4 APP control the camera: ....................4 4 PIN ports(1.25MM): .....................6 Type C Port: ........................6 Format SD Card: ......................8 Installation: ........................8 Record videos: .........................8 File Transfer: ........................8 PC CAM: .........................9 How to use Gyroflow : .....................9 IOS：... -
Page 3: Safety Guidelines
www.CNfpv.com Safety Guidelines： Please read the instruction manual carefully before using the camera for the first time. Please check the latest version manual on our website. 1.It’s a high-precision product, do not drop or crash it. 2.Do not expose the camera to strong magnetic objects, such as magnets or electrical motors. -
Page 4: Features
www.CNfpv.com www.CNfpv.com Features ： Note: ND filters are optional. ote: ND filters are optional. Button: Name Long press Long press Click Double Click Power/Record/ Power ON Power ON Start/Stop Recording Turn ON/OFF WiFi Turn ON/OFF WiFi WiFi Button Power ON(WHEN Quick recording mode ON) LED indicator ：... - Page 5 www.CNfpv.com Google Play: Double click to turn on the camera Wi-Fi （ When the camera is ON ） ,LED are flashing alternative. Double Click Search “ Hawkeye-xxxx ” in Wi-Fi with the smart phone and connect it. Default password: 12345678 After connecting the camera, run OKJ APP and then connect the camera.
-
Page 6: Pin Ports(1.25Mm)
www.CNfpv.com www.CNfpv.com 4 PIN ports(1.25MM): Video trigger: Active low. Please . Please follow remote control. Remote control to Remote control to record video 1: AV Out: Analog video output GND: Ground Power: +6-23V Note: Never connect video/trigger port to power+!!! video/trigger port to power+!!! Type C Port: A8,B8 : TV output (16pin or 24pin) - Page 7 www.CNfpv.com...
-
Page 8: Format Sd Card
www.CNfpv.com Performance and Specifications: Resolutions 4K 50FPS(4:3 ,2880*2160 gyro data) 4K 30FPS/ 1080P 50FPS/ 2.5K 50/30FPS/ 2.5K 50/30FPS 4:3 AV output PAL/NTSC PAL has lower latency! Micro SD card U1 SanDisk recommend SD card supported 8-256G(FAT32/exFAT) Size 52.5×23*21.7 MM Weight File format *.MP4/H.265 Lens... -
Page 9: Pc Cam
www.CNfpv.com PC CAM: When the camera is turned OFF, connect it to the computer with a USB cable and the camera will automatically enter PC CAM mode. Use “amcap” software to see the pc cam. How to use Gyroflow : IOS ：... - Page 10 www.CNfpv.com 4. Click auto sync to sync the video and gyro data(Keep gyro offset and search size default ， sync points at least 5 5. Export video 6. You can select a video clip or change resolutions to reduce the rending time.
-
Page 11: Android
www.CNfpv.com Video tutorial https://youtu.be/NaIAbzdivl0?si=Ji2aoBxGAELgyFMN Android: Android: Please MUST USE this version gyroflow, or you will waste your time, and the tutorial is not match. https://drive.google.com/file/d/1gHmF8C-gqs___9XqPbChQVJ-LdMjNdhN/view?usp= sharing Use sd card reader to ready the video and gyro data on the sd card, make sure they are on the same directory. - Page 12 www.CNfpv.com gyro data in this resolution ） 1. Select a video file in the sd card directory. 2. Click on the blue font(Normally ONLY for the first time to authorize) to select the file directory for access authorization.
- Page 13 www.CNfpv.com 3. Click “ auto sync ” (Keep gyro offset ,search size default, sync points at least 4. When finished, Export video 5. You can select a video clip or change resolutions to reduce the rending time.
- Page 14 www.CNfpv.com Video tutorial https://youtu.be/F7fNt5FCvkQ?si=YDwFWvUEyHh5NCuf...
-
Page 15: Pc( Win 10, 11)
www.CNfpv.com PC( WIN 10, 11): Software downloads ( Please MUST USE this version gyroflow, or you will waste your time, and the tutorial is not match https://drive.google.com/file/d/1b9hHcAquPv38hZttc9Xcz6gURHscVj-k/vi The video and the gyro files are NEED to placed in the same directly and the file names are the same. （... - Page 16 www.CNfpv.com 3. When the sync process is finished, export video. 4. For saving time ,you can select a video click to output.
-
Page 17: Portrait Video
www.CNfpv.com Portrait video ： When camera play in portrait, input 90 degrees in “rotation” in gyroflow: Set the output to portrait mode. - Page 18 www.CNfpv.com How to flip the chest clip to a vertical screen. https://youtube.com/shorts/H8f_pgFre2Y?si=egb4KZYRow0yfU6A...
-
Page 19: Notes For Gyroflow
www.CNfpv.com Notes for Gyroflow : 1. Sync time change to 3-5 second: 2.Use rs-sync: 3. （ 4K 50 can not be stabled, cause no gyro data in this resolution ） 4.Select Dynamic zooming, then there will be no black side. 5.Sync points should be similar number, if its too different, delete it and add a sync point on other point(right click on the mouse). - Page 20 www.CNfpv.com 7.Software require Win 10,11. If can’t open the software, install the VC pack: VC_redist.x64.exe . Download link : https://aka.ms/vs/17/release/vc_redist.x64.exe 8. If still can’t open, you can install VC: https://visualstudio.microsoft.com/zh-hans/downloads/?cid=learn-onpage- download-cta 10. The light dot is optical flow, you could turn it off.
-
Page 21: Update Firmware
www.CNfpv.com Update Firmware: 1. Delete all the files and folders in the SD card. 2. Download the bin firmware to SD card. 3. Insert the SD card into the camera. 4. Power on the camera and it will update firmware automatically. 5. -
Page 22: System Settings
www.CNfpv.com -2.0.Note:Higher value for brighter image. If you want brighter image, set this value higher. If the image is over exposure, set the value smaller. Record Audio：Off、On. Time-lapse record：Off、0.05、0.1、0.5、1、3、5、10，30、60sec.Note: Time-lapse is a video recording mode that captures video at a very low frame rate: around one to two frames per second, although this depends on the length of the recording. - Page 23 www.CNfpv.com the ISO rating was known as the “film speed” and “ASA.” Having a standard of sensitivity is important, as it allows you to shoot the same ISO on different cameras and trust that the exposure value will be equal. Lower ISO, darker image, less noise. Color：Color，Black&white，Sepia, Flat color.
-
Page 24: Camera Set Up & Tutorials
www.CNfpv.com Camera set up & tutorials: https://youtu.be/UvgmEo4Zv5E Gyroflow software tutorial: https://youtu.be/Q0Rv532HyX0 Triggers: The trigger pins(Active Low) need to be connected to the trigger control cable. Scan to watch. Note: Don’t connect the trigger pins to any power. If you want to control it by a MCU, connect it to a 3.3V GPIO through a 1K resistance. -
Page 25: Remote Control To Record Video
www.CNfpv.com www.CNfpv.com Remote control to record video: Remote control to record video: A 2 way switch to control . The following example uses Betaflight F405 flight controller to illustrate how to configure The following example uses Betaflight F405 flight controller to illustrate how to configure The following example uses Betaflight F405 flight controller to illustrate how to configure the remote control to turn on/off the video recording function. -
Page 26: Remote Control To Record Video
www.CNfpv.com Remote control to record video : NOTE: FC Arm to record, dis-arm to stop recording. The following example uses Betaflight F405 flight controller to illustrate how to configure the remote control to turn on/off the video recording function. Use the pin on the flight controller to control the recording and connect the Hawkeye Cam’s TRG wire (video trigger). - Page 27 www.CNfpv.com 3D print files download from: https://www.thingiverse.com/hawkeyefpv2/designs...
- Page 28 www.CNfpv.com NOTE: Check on www.CNfpv.com for new firmware/Manual updates. For more information please check our Youtube/Facebook/Instagram/Ticktock channel: HawkeyeFPV FCC STATEMENT： This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the 4K Thumb Cam 2 Gyroflow Smooth and is the answer not in the manual?
Questions and answers