Show Mac-Range Alloc - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Chassis MAC Server (CMS) Commands

show mac-range alloc

Displays all allocated addresses from the MAC range table.
show mac-range [index] alloc
Syntax Definitions
index
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
If you are assigning VLAN router ports while the switch is in single MAC router mode, all VLAN router
ports will use the base chassis MAC address (ID value 0).
Examples
-> show mac-range alloc
Range Mac Address
-----+-----------------+--------------------+---
01 00:d0:95:6b:09:40 CHASSIS
01 00:d0:95:6b:09:41 802.1X
01 00:d0:95:6b:09:5f CHASSIS
output definitions
Range
Mac Address
OmniSwitch CLI Reference Guide
Identifies the MAC range by referring to its position in the MAC range
table. Currently, index position 1 only is supported.
Application
The MAC range's index number. The index number refers to the posi-
tion of the range in the MAC range table. Values may range from
1–20. MAC ranges are divided by index number into four distinct cate-
gories. Refer to page 55-7
Current MAC address allocated for a specific application.
June 2012
Id
0
0
1
for more information.
page 55-9