Related Manuals for NavInc RNS-E
Summary of Contents for NavInc RNS-E
- Page 1 _____________________________________________________________________________________ Version 2.0.0 EN 14-07-2017 Installation manual multimedia interface RNS-E Designed for Audi RNS-E system Art nr. IF-AUDI-RNSEV...
-
Page 2: Table Of Contents
6: REQUIREMENTS ............................ 7 7: INSTALLATION ............................9 8: ACTIVATION ............................18 9: SETTINGS .............................. 18 10: FAQ ....................Fout! Bladwijzer niet gedefinieerd. 11: WARRANTY ............................23 12: TECHNICAL DATA ..........................23 12: TECHNICAL SUPPORT ........................23 Pagina 1 www.navinc.nl... -
Page 3: 1: Important Information
_____________________________________________________________________________________ 1: IMPORTANT INFORMATION You have made the right choice by purchasing advanced NavInc multimedia products. We recommend to read the installation instructions carefully before starting the installation. Installation must be done by a qualified personnel. Installation of the interface is entirely at your own risk. We accept no liability for damage to the vehicle or personal injury. -
Page 4: 2: Installation & Safety Instructions
Check always the compatibility of the interface for your car before installation. You can check the compatibility on www.navinc.nl or call NavInc for support. o Avoid installing the unit in following places: Where it would hinder your safe driving – Where it could damage the car’s fitting. -
Page 5: 3: Scope Of Delivery
6) LVDS extension cable: 1x 7) A/V cable: 1x 8) Button print: 1x 9) Interface module: 1x Installation instructions: 1x 4: COMPATIBILITY Car models The interface is compatible for Audi RNS-E with Piano lack finish Please check www.navinc.nl for more details Pagina 4 www.navinc.nl... -
Page 6: 5: Wire Diagram
_____________________________________________________________________________________ 5: WIRE DIAGRAM Power cable Touchkabel Pagina 5 www.navinc.nl... - Page 7 Audio output right (connection to car audio input) White RCA Audio output left (connection to car audio input) Yellow RCA 2x Video output (NTSC) REAR R-CAM yellow RCA Camera input rear (/NTSC) FRONT F-CAM yellow RCA Camera input front (NTSC) RGB input cable Pagina 6 www.navinc.nl...
- Page 8 _____________________________________________________________________________________ Overview Pagina 7 www.navinc.nl...
-
Page 9: 6: Requirements
1: Check if the interface is compatible with your system. 2: When you receive this package you have to check whether there’s any parts not included and you have to contact us right away. 3: Get the right installation tools 4: Only compatible with NTSC sources. Pagina 8 www.navinc.nl... -
Page 10: 7: Installation
7: INSTALLATION Attention; do not install the interface when the ignition is ON. 7.1 Dissemble 1: Remove the RNS-E head-unit. Use 4 unlocktools (not included). *Make sure you have the radio code before you remove the power connector from the head-unit. - Page 11 _____________________________________________________________________________________ 3: Remove the indicated black cover. Pagina 10 www.navinc.nl...
- Page 12 1: After removing the screws from the back side, please put the provide LVDS extension cable into the indicated hole. 2: Connect the provided LVDS cable with the RNS-E and the original FPC cable with the sub-board. Pagina 11 www.navinc.nl...
- Page 13 Rear DET – Brown (pin 7) +12V input trigger wire for rear camera input. Front DET – Blue (pin 6) +12V input trigger wire for front camera input. Mode Button Green (pin 14) - button red Black (pin 15) – button black Pagina 12 www.navinc.nl...
- Page 14 +12V input trigger wire for front camera input. When you want to use this wire you must put the option “FrontCam-Type”” in “Extwire”. When you do not want to use this wire please put option “FrontCam-Type” in OFF position. Pagina 13 www.navinc.nl...
- Page 15 * Do not connect an audio adapter/filter between the audio output of the interface and input of the car. *Camera is only switching on navigation level. *Only use NTSC video signals. Pagina 14 www.navinc.nl...
- Page 16 White RGB Sync Pin 3 Blue RGB Blue Pin 2 Green RGB Green Pin 1 RGB Red *Make sure dipswitch 1 is in OFF position when using this input *Input DIGITAL = Digital RGB = not function Pagina 15 www.navinc.nl...
- Page 17 OFF=AV1 input is active 3: A/V2 ON= skipping A/V1 mode; OFF=AV2 input is active 4: x No function 5: x No function 6: Brand No function 7: Brand RNSE 8: Model RNSE * Check the interface LED status Pagina 16 www.navinc.nl...
- Page 18 _____________________________________________________________________________________ 7.7 REMOTE 1: Connect the keypad with the interface input “PROGRAM”. Function keypad: MENU: activate OSD menu (OSD menu) Arrow up: cursur up Arrow down: cursur down SEL: enter / selection Pagina 17 www.navinc.nl...
-
Page 19: 8: Activation
8.1 Activation Video interface: Button Use the external button to toggle between RGB / AV1 / AV2 / OEM Steering wheel (only for Audi R8) Use the external button to toggle between RGB / AV1 / AV2 / OEM Pagina 18 www.navinc.nl... -
Page 20: 9: Settings
RearCam-Det : Setup Rear detection CAN: dectection via CAN Extwire: detection via “REAR DET” wire AV Mode : not in use FrontCam-Type : Setup front camera ExtDevice – Aftermarket front camera OEM – OEM front camera (or no camera) Pagina 19 www.navinc.nl... - Page 21 _____________________________________________________________________________________ Option (2) FrontCam-RcvOpt : Selection time front camera Adjustment from 1 – 30 seconds Steering Wheel : No function Reset : Reset all values Pagina 20 www.navinc.nl...
- Page 22 CONTRAST: contrast adjustment SATURATION: saturation adjustment SHARPNESS: sharpness adjustment Screen (NAVI) Picture adjustment level (NAVI): H-POSITION : picture position horizontal V-POSITION : picture position vertical Scale X Up: picture size up Scale X Down: picture down size Pagina 21 www.navinc.nl...
- Page 23 OFF: no parking lines Warning Lang: language warning See menu Horizontal: adjustment parking lines horizontal Vertical: adjustment parking lines vertical Pressing this Horizontal / Vertical menu, The OSD screen automatically disappears. Please adjust from the parking line Screen. Pagina 22 www.navinc.nl...
-
Page 24: 12: Technical Data
• Damaged of the interface • Own reperations • Modified cables 11: TECHNICAL DATA Software version: RNS-E Voltage supply: 12V DC 10,5 – 14,8 V Voltage-operating capacity: Standby current: 1 mA Operating current: 12 W...
Need help?
Do you have a question about the RNS-E and is the answer not in the manual?
Questions and answers