H3C MSR 20-20 Command Reference Manual page 1094

1094 C 75: IS-IS D
HAPTER
C
EBUGGING OMMANDS
Table 247 Description on the fields of the debugging isis datalink-receiving-packet
command
Field
Circuit NOT operationally ON
SYS not functional. Ignoring recvd packet
Rxed IS-IS PDU on Circuit circuitName, PDU's
type is packetType
Table 248 Description on the fields of the debugging isis datalink-sending-packet
command
Field
Sending IS-IS PDU on Circuit circuitName
Socket Send PDU error
Socket Send PDU success
Sending IS-IS PDU Failure
Table 249 Description on the fields of the debugging isis general-error command
Field
UPDT: PDU length mismatch in SNP: RecLen =
%d, EncodeLen = %d.
RECV: PDU length mismatch in Hello PDU :
RecLen = %d, EncodeLen = %d
PROT-ERR: Wrong P2P IIH Hdr Length, %d. It
should be %d
PROT-ERR: Wrong LAN IIH Hdr Length, %d. It
should be %d
PROT-ERR: Wrong L1/2CSNP Hdr Length, %d.
It should be %d
PROT-ERR: Wrong L1/2 PSNP Hdr Length, %d.
It should be %d
PROT_ERR: Wrong L1/2 LSP Hdr Length, %d.
It should be %d
Table 250 Description on the fields of the debugging isis graceful-restart command
Field
RST: levelType T1 Timer Started on circName,
Counter: count
RST: Notifying RM that the Process is Entering
Restart.
RST: Notifying RM that the Process is Leaving
Restart (Due to Rst Disable).
Description
Interface is not ready for operation.
System is not functioning and therefore
ignores the received packets.
An IS-IS PDU was received on the interface.
circuitName: Interface name
packetType: Interface type.
Description
Sending IS-IS PDU through the interface.
circuitName: Interface name
An error occurred when the socket was
sending a PDU.
Socket sent a PDU successfully.
Socket failed to send a PDU.
Description
SNP packet length mismatch
Hello packet length mismatch
Wrong P2P Hello packet header length
Wrong LAN Hello packet header length
Wrong L1/2 CSNP packet header length
Wrong L1/2 PSNP packet header length
Wrong L1/2 LSP packet header length
Description
GR timer started.
levelType: system type, which can be L1 or L2.
count: Number of times GR timer has started.
circName: Interface name
Notifying RM that the process is entering the
GR state.
Notifying RM that the process is leaving the
GR state because GR is disabled.