Advertisement
2-3
Front Panel LEDs and Buttons
No. Name
Reset Button
1.
NMI button
2.
Power button
3.
with LED
ID Button with
4.
LED
(Note)
HDD Status
5.
LED
(Note)
System
6.
Status LED
LAN1/2 Active/
7/8.
Link LED
(Note) If your server features RoT function, please see the following section for detail LED behavior.
1
3
5
7
L1
Color
Status
--
--
--
--
Green
On
Green
Blink
N/A
Off
Blue
On
N/A
Off
On
Green
Blink
Amber
On
Green/
Blink
Amber
N/A
Off
Green
On
Green
Blink
N/A
Off
System Appearance
2
4
6
8
L2
Description
Press this button to reset the system.
Press this button for the server to generate a NMI to the
processor. If multiple-bit ECC errors occur, the server will
effectively be halted.
Indicates the system is powered on.
System is in ACPI S1 state (sleep mode).
- System is not powered on or in ACPI S5 state (power off)
- System is in ACPI S4 state (hibernate mode)
Indicates the system identification is active.
Indicates the system identification is disabled.
Indicates locating the HDD.
Indicates accessing the HDD.
Indicates HDD error.
Indicates HDD rebuilding.
Indicates no HDD access or no HDD error.
This LED represents the RoT function LED behavior.
Please see the following section for detail LED behavior.
Indicates a link between the system and the network or no
access.
Indicates data trasmission or receiving is occuring.
Indicates no data transmission or receiving is occuring.
- 19 -
Advertisement
