Page 1
™ 4-in-1 pramette stroller Instruction Manual Weight: birth up to 50 lb. (22.7 kg) Height: up to 45 in. (114.3 cm) product guide videos IMPORTANT! Read the instructions in this manual before use of the product.
Contents: Warranty Information Warnings Parts List Opening Stroller Attaching & Detaching Front Wheels Attaching & Detaching Rear Wheels Attaching & Detaching Canopy Attaching & Detaching Cup Holder Attaching & Detaching Arm Bar Securing Your Child Adjusting Backrest Adjusting Calf Support Using Pramette Using Front Swivel Lock Using Brake...
Please have the proof of purchase, model number and date of manufacture available when you contact us. For warranty information please visit: www.joiebaby.com/us Contact: Joie Baby USA Consumer Service Contact Info Address: 70 Thousand Oaks Blvd., Morgantown, PA 19543 Email: info.us@joiebaby.com Phone: 1-866-798-7866...
Genuine Parts Only: Use only genuine parts and • accessories from Joie. Overloading, incorrect folding, and using acces- • sories other than those approved by Joie, e.g. child seats, bag hooks, rain covers, buggy boards, etc., may damage or make the stroller unsafe.
Page 5
WARNING Failure to follow these warnings and instructions could result in serious injury or death. Weight & Height Limits: This stroller is only • suitable for children up to 50 lb. (22.7 kg) and 45 in. (114.3 cm) tall. Exceeding these limits can cause wear and tear, potentially leading to an unstable stroller.
Page 6
WARNING Failure to follow these warnings and instructions could result in serious injury or death. Strangulation Hazard: Do not place items with a • string around your child’s neck, suspend strings from the stroller, or attach strings to toys. DO NOT let your child play with the stroller. •...
Page 7
To prevent a hazardous, unstable condition, DO • NOT place more than 1 lb. (0.5 kg) in the cup holder. When using the stroller frame with a Joie car • seat, refer to the child usage requirements listed in the car seat instruction manual.
Parts List: Please make sure there are no missing parts. Please contact Joie Consumer Service if anything is missing. Stroller Frame Car Seat Adapters Front Wheels Rear Wheels Arm Bar Handle Cup Holder Buckle Storage Basket Canopy Seat Pad Shoulder Harness...
Opening Stroller: Separate storage latch from storage mount. Lift the handle upwards. A “clicking” sound will confirm that the stroller is completely open. For first use, press the footrest down to reset it (A), then connect the hook and loop fasteners under the calf support (B). IMPORTANT: Check that the stroller is completely open by pushing down on the handle.
Attaching & Detaching Rear Wheels: 1 - Attaching the Rear Wheels: Insert the rear wheels into the rear legs. A “clicking” sound will confirm that the wheels are properly locked in place. IMPORTANT: Safety Check: Always pull on the wheels after attachment to ensure they are securely fastened.
Attaching & Detaching Cup Holder: Wrap the cup holder clasp around the right side of stroller frame. A “clicking” sound will confirm that the cup holder is properly locked in place. To remove cup holder, unhook cup holder clasp from around stroller frame and remove.
Attaching & Detaching Arm Bar: 1 - Attaching the Arm Bar: Align the arm bar ends with the arm bar mounts, and insert until it clicks into place. A “clicking” sound will con- firm that the arm bar is properly locked in place. 2 - Detaching the Arm Bar: To remove the arm bar, press the arm bar release buttons (A) and pull the arm bar out (B).
Securing Your Child: 1 - Release Buckle: Locate the button in the center of the buckle and press it firmly to release the harness straps. 2 - Lock Buckle: Slide the shoulder harness buckle into the lap belt buckle (A). Insert the combined buckles together into the center buckle (B).
Page 20
Shoulder Harness Height Adjustment: Locate the shoulder harness anchors (A) on back of seat. Turn the shoulder harness anchor (B) to face forward, aligning it with the shoulder harness strap. Thread the anchor through the shoulder harness slot from back to front. Re-thread the anchor through the slot closest to your child’s shoulder height.
Adjusting Backrest: 1 - Recline Backrest: While pressing the button in the center of the angle adjuster (F), pull the backrest backwards (G). 2 - Raise Backrest: While pulling the webbing at the end of the angle adjuster (H), push the backrest forwards (I). Make sure the recline is set properly for use.
Using Pramette: For Pramette Mode: On the underside of the seat, unbuckle the calf support clip and then recline the seat fully. (See page 22 for instructions on reclining the seat.) On the back of the seat, pull the pramette seat lever out (A), while pulling down on seat to pivot the seat flat (B).
Using Front Swivel Lock: 1 - Locking the Wheel: Ensure the front wheel is positioned straight ahead, not angled to the side. Look above the front wheel for the lock tab. Rotate the lock tab clockwise (towards the right side of the stroller).
Using Canopy: 1 - Opening and Closing the Canopy: To open, pull the canopy forward towards the front of the seat. To close, push the canopy back until it reaches the desired position. 2 - Ventilation For additional airflow, flip up the canopy window cover. Adjusting Handle Locate the handlebar sliding locks just below the grip (A).
Adjusting Seat Height: 3-Position Seat: To raise seat height, pull up on seat. To lower seat height, locate the seat height adjustment buttons (A). While squeezing and holding the seat height adjustment buttons, push down on the seat. Lock the seat in position by releasing the height adjustment buttons.
Using Reversible Seat: The Seat is Reversible so the Child can Face Rearward or Forward. Squeeze the seat release buttons (A) while lifting the seat (B). Turn the seat to reverse direction and then reinsert the seat into the seat mounts. Both seat mounts must be level for the seat to attach to the frame.
Folding Stroller: Before folding, make sure canopy is completely closed and seat is in forward-facing upright position. For directions on switching the direction of the seat, see page 32. Press in the lock button located on the left stroller folding release tab (A). Pull upwards on both tabs (B) simultaneously to fold the stroller.
Use stroller only with Joie car seats. Using with Joie Car Seat To use with a Joie car seat, first remove the stroller seat. Squeeze the seat release buttons (A) while lifting the seat (B). See page 32 for more detailed instructions.
Discontinue use if parts are loose or missing. Loose screws: Tighten any loose screws you find. Worn parts: Replace any worn or damaged parts. Use only Joie replacement parts. Torn material or stitching: Repair or replace torn fabric or stitching.
Page 39
Storage: Sun and heat exposure: Avoid excessive sun or heat exposure to prevent fading or warping of parts. Drying after use: If the stroller gets wet, open the canopy and allow it to dry completely before storing. Wheel Maintenance: Squeaking wheels: Apply a light coat of lubricating oil (e.g., silicone spray, anti-rust oil, or sewing machine oil) directly to the axle and wheel assembly to eliminate squeaking.
Need help?
Do you have a question about the ginger and is the answer not in the manual?
Questions and answers