Ezurio ConnexLink CL4490 Series Quick Start Manual

CL4490-1000-232, CL4490-1000-485, CL4490-1000-PRO
1 Introduction
The goal of this guide is to outline how to configure the CL4490 ConnexLink units with the most basic settings to establish a Point-to-Point (P2P)
or Point-to-MultiPoint (P2MP) connection between two or more CL4490 units.
Note: CL4490-1000-PRO requires slightly different steps to configure due to the DIP switches. These instructions are covered in
Switches (CL4490-1000-PRO
2 Requirements
To configure these units, the following are required:
• Two (or more) CL4490-1000-xxx units (for demonstration purposes, we worked with the RS232 variant)
• RSxxx-to-USB interface adapters (to enable connection to PC) – not included with CL4490 units
– RS232-to-USB
(examples: FTDI RS232-to-USB Model: UC232R-10, Tripp-Lite Keyspan RS232-to-USB Model: USA-19HS)
– RS485-to-USB
(example: ULinx RS485-to-USB Model 485USBTB-2W
– RS485-to-RS232 combined with RS232-to-USB adapter
(example: B&B Electronics Model: 485SD9TB)
• PC Operating Windows XP or newer
• Laird Configuration and Test Utility Software v6.07
(Optional) Female-to-female pin jumper wire (to tie TX/RX RS232 pins for loopback test) or serial loopback plug (example:
•
Female Serial Loopback
3 Download and Install Configuration Software
You will need to download the Laird Configuration and Test Utility Software v6.07
Note: Downloading the configuration utility will require the completion of a Software Request Form, which will pop up when you click on the
download link. This Software Request Form is required so that we have valid contact information to use for product update notifications,
such as new software releases. Once you submit this form a download link should be made available at the top of the Product Page.
Additionally, you should receive a download link via email.
https://www.ezurio.com/
ONLY).
from
Adapter)
© Copyright 2024 Ezurio
All Rights Reserved
CL4490 Product Page
from the CL4490 Product
1
CL4490 Quick Start Guide
Application Note
Configure DIP
SeaLevel DB9
Page.
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852-2762-4823
v2.0