Sony TC-500A Servicing Manual

ee eee
Power Requirement :
Tape Speeds:
Track System :
Reel Size:
Frequency Response :
Signal-to-Noise Ratio:
(Per Channel)
Flutter and Wow:
Bias Frequency :
Level Indication :
Input Circuit :
Output Circuit :
Output Level :
Tube Complement :
Weight :
Dimensions :
110 Wes ~~ SPeCifications
100V, 110V, 117V, 125V, 220V or 240V {Voltage selector provided in the set)
AC 50c/s or 60¢/s (Convertible by changing Capstan, Pinch Roller and Frequency Switch }
Instantaneous selection, 7-1/2 ips or 3-3/4 ips (19 or 9.5cm/s}
4-Track -
Up to 7" (18 cm}
30~18,000 cps at 7-1/2 ips (19 cm/sec}
30~13,000 cps at.3-3/4 ips [9.5 cm/sec }
50 dB {Measured by NAB standards }
less than 0.15% oat 7-1/2 ips
less than 0.20% at 3-3/4 ips
Approx. 80 Ke
Two VU Meters (calibrated to 0 dB at 12dB below saturation}
2-Microphone Jack {high impedance } :
2-Auxiliary Input Jack {high impedance }
2-Monitor Speaker Jack (low impedance)
2-line Output Jack (1.5KQ-0 dB}
1-Binaural Monitor Jack (low impedance }
Monitor Speaker (3 watts per channel }
2-12AD7 lor 12AX7), 2-6AU6, 2-6AQ5, 1-12BH7A, 1486CA4
Approx. 55!bs. (25 Kg)
18-1/2 WX 16-3/16 DX 12-1/4 H"
(470 W410 D310 Hmm) ®
SERVICING GUIDE
Original