Rigol MSO8000-BND Manual page 306

Digital oscilloscope
Hide thumbs Also See for MSO8000-BND:
Table of Contents

Advertisement

Waveform Recording and Playing
Before recording the waveforms, you can press More > Setting to select "Record" to
set the following parameters.
1. Interval
The recording interval indicates the time interval between the frames during the
recording process.
Press Interval, then rotate the multifunction knob
keypad to set the time interval between frames. The available range is from 10 ns
to 10 s.
2. Frames
The recording frames refer to the number of frames that can be recorded actually.
After starting the recording operation, the oscilloscope stops the recording
operation automatically when the number of recorded frames reaches the set
value.
Press Frames, then rotate the multifunction knob
set the number of recorded frames. The available range is from 1 to the maximum
number of frames that can be recorded currently (available in the Max Frames
menu). Press Set to Max to set the number of recorded waveform frames to the
maximum number of frames automatically.
3. Max Frames
The menu shows the maximum number of frames that can be recorded currently.
As the capacity of the waveform memory is fixed, the more the number of points
each frame of waveform has, the less the number of waveform frames that can be
recorded. Therefore, the maximum number of recorded frames is related to the
currently selected "memory depth" (refer to "
memory depth refers to the number of waveform points per frame. Memory Depth
= Sample Rate x Horizontal Time Base x Number of Grids in the Horizontal
Direction. Therefore, the maximum number of frames of waveform recording is
also related to the "Sample Rate" and "Horizontal Time Base". This oscilloscope
supports up to 450,000 frames of real-time and ceaseless waveforms recording.
4. Beeper
Press Beeper continuously to set whether the beeper sounds when the recording
is completed.
On
Off
290
: the beeper sounds at the end of recording.
: the beeper does not sound at the end of recording.
or use the pop-up numeric
or use the numeric keypad to
Memory Depth
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
"). The current

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MSO8000-BND and is the answer not in the manual?

Questions and answers

Table of Contents