ST IN window
In this window you can view and edit the mix parameters of ST IN channels 1–8. The parameters shown in the window can
be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window.
You can access this window in the following ways.
• From the [Windows] menu, choose [Overview] and then choose "ST IN"
• Use the bank select keys in the Master window to turn on the [ST IN] button
34
1
2
5
6
7
1
Input patch
Selects the input source that will be assigned to the ST IN channel. The input sources that
can be assigned are the same as for an INPUT CH (➥ p.12.)
2
HA (HA analog gain)
Drag the knob in the screen to adjust the analog gain of the internal head amp or of the
external head amp patched to the ST IN channel.
3
48V (Phantom power)
Switches on/off the phantom power (+48V) of the internal head amp or of the external head
amp patched to the ST IN channel.
4
Ø (Phase)
Inverts the phase polarity of the signal after AD conversion.
5
Digital Gain
Drag the knob in the screen to adjust the input gain to each ST IN channel.
6
HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit the
cutoff frequency.
7
EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked.) This is the same as the equalizer for
INPUT CH (➥ p.13.)
15
CL Editor Owner's Manual