Select A Mixer And Begin Working; Edit Mixer Configurations - Yamaha CL3 User Manual

Yamaha Commercial Audio
v. Select the Model of CL series console. Note: in the initial release of CL
StageMix, CL5 will be the only selectable choice.
vi. Press the [ADD MIXER] button at the bottom of the screen.

3.3.3 Select a Mixer and Begin Working

If your iPad has been configured to work with a CL series console, select the
mixer from the list and press [CONNECT]. (The model of mixer (CL1, CL3 or
CL5) will appear in smaller text below the mixer's name.)
The message "Syncing With CL..." will appear while StageMix is obtaining
parameters from the console. After this process is complete, the Mixer window
will appear and StageMix is ready to be used.
If StageMix cannot connect with your console, refer to the Troubleshooting
section (9.0) at the end of this document for possible solutions.

3.3.4 Edit Mixer Configurations

The parameters of a saved Mixer Configuration can be viewed and edited by
tapping the right arrow button next to a mixer's name. This will open the Edit
Mixer screen which allows the Name, IP Address and MAC Address to be
verified and edited using the procedures described in section 3.3.2. After
editing, press [SAVE MIXER] to save any changes.
CL StageMix V3.0 User Guide
Page 8