Lumiloop LSPM 1.0 Quick Start Manual

LSPM 1.0/2.0 Quick Start Guide
LUMILOOP GmbH
March 28, 2024
The most recent version of this document and the full
length LSPM User's Manual can be found at
lumiloop.de.
1 System Overview
The LSPM 1.0/2.0 system consists of a high-speed RF
power meter, a 5V/3A power supply and a USB 2.0
cable. The LSPM Carrying Case contains the Lu-
miloop Software Package on a USB ýash drive with
manufacturer and optionally accredited calibration
data.
The LUMILOOP TCP Server handles all USB com-
munication for LSPM 1.0/2.0. The LUMILOOP GUI
and other third party EMC software access the LU-
MILOOP TCP Server using SCPI commands which are
exchanged via a TCP/IP connection.
2 Software Installation
1. Run the üle LUMILOOP_Installer.exe found on
the USB thumb drive and follow the installation
instructions.
2. Copy the supplied calibration data into the di-
rectory selected during TCP Server and GUI
installation. E.g., if the calibration data direc-
tory is C:\ProgramFiles(x86)\LUMILOOP\cal\
lspm and the serial number of the LSPM 2.0
is 42, please copy the whole directory named
2v0sn42 from the installation medium into the
cal\lspm directory.
3 System Startup
1. Connect the included mains adapter to the
LSPM.
2. Connect the LSPM to the host computer using
the included USB cable.
3. Switch on the LSPM by setting the front panel
www.
switch to 1 and observe the green power LED
starting to ýash. If the host computer has ac-
cess to the online Microsoft Windows Update,
the USB driver will be installed automatically.
Otherwise, the USB driver needs to be installed
from the PC's hard drive.
4. Start the LUMILOOP TCP Server via the
Windows Start menu and check that the
green power LED is constantly on. The LU-
MILOOP TCP Server will display a list of de-
tected calibration data sets and a list of all de-
tected LSPM devices, as shown above.
If this step fails, consult the LSPM User's Man-
ual, Section 5.2.
5. Since the LUMILOOP TCP Server needs to
open a TCP port, the system's ürewall may ask
for permission for network access. Access must