Powering Up The Gateway - TEKTELIC Communications KONA MEGA GATEWAY Quick Start Manual

What's is the Box:
KONA Mounting Kit
DC Power Connector
Safety Ground Cable
KONA Mega Gateway
*Note that there are many different models of the Kona Mega gateway, and your gateway's physical interfaces may appear different than depicted above
Note:
1
Optical backhaul is optional, whereas copper Ethernet backhaul is standard
• To install the Gateway you also need POE Injector, External LoRa Antennas and Ethernet Cable that are sold separately
• Refer to
Antenna Selection Guide
• Refer to
User Guide

Powering Up the Gateway

RJ45 cable jacket
LTE Antenna
GPS Antenna
for information on antenna use cases and recommendations
for more information on deployment, installation and regulatory considerations
T E K T E L I C C o m m u n i c a t i o n s I n c . C o n f i d e n t i a l
Mega Gateway supports up to two external LoRa antennas,
a GPS antenna, copper and optional
backhaul, and optional 3G/4G wireless backhaul and is
powered using Direct DC input power or Power over
Ethernet (PoE++).
LoRa RF Antenna 1
ODVA Optical
GPS Antenna
Protective Earth Ground
LED DC Power
1 optical Ethernet
LoRa RF Antenna 0
Enclosure Vent
3G/4G Modem
Antenna
Copper Ethernet