Wiring The Charger Tower - Lincoln Electric VELION DC Fast Charger K5490-1 Installation And Commissioning Manual

Wiring the Charger Tower

Connecting Power ........................................................................................................................... 28
Installing the Earth Ground ............................................................................................................. 28
Connecting AC Power..................................................................................................................... 29
Connecting DC Power .................................................................................................................... 30
Connecting Signal Wiring ............................................................................................................... 30
Electricity can cause injury or death. Document and follow lockout and tagout procedures when
working with live circuits to reduce the chance of injury or death.

The power and neutral (or ground) circuits are electrically hot when the power is on.

Turn off power using lockout/tagout procedures at the supply power disconnect before working
on the equipment.

Do not install, operate, or repair this equipment without reading this manual and the safety
precautions contained throughout.

Ground the equipment in accordance with the U.S. National Electrical Code and the
manufacturer's recommendations.
DANGER
Risk of Electric Shock

A qualified installation engineer, certified for local and state regulations is required for all
electrical connections.

Wear safety shoes, protective clothing, glasses, gloves that have been inspected. Wear hearing
protection as needed. Refer to the Personal Protection Equipment section.

Document and follow lockout and tagout procedures when working with live circuits.
DANGER
Risk of Electric Shock
VELION™ DC Fast Charger
Wiring the Charger Tower
Page 27