Do you have a question about the BC112G and is the answer not in the manual?
Questions and answers
Larry A Bopp
February 4, 2025
we had a power surge now when plugged in it just chirps does not run no lights
Mike
March 10, 2025
Temperature shows LL. How do I get it to the 59 degrees I set it
1 comments:
Mr. Anderson
March 10, 2025
To change the temperature on a Haier BC112G wine cooler:
1. Press and hold both the "White Wine" and "Red Wine" buttons for about 3 seconds to enter temperature set mode. 2. Use the "White Wine" button to decrease the temperature or the "Red Wine" button to increase it. 3. Each press changes the temperature by 1 degree. 4. Once you reach 59°F, press the "Light/Set" button to confirm. 5. The LED display will return to showing the current internal temperature.
There may be a 3-degree variance between the selected and displayed temperature.
Wine Cooler Rafraîchisseur à Vin Enfriador de Vino User Manual- Model #’s BC112G Guide de l’Utilisateur- Modèles Manual del Usuario- Para Modelos de...
Note: If for any reason this product requires service, we strongly recommend that a certified technician performs the service. 6) If your old wine cooler is not being used, we recommend that you remove the door and leave the shelves in place. This will reduce the possibility of danger to children.
Page 3
SAVE THESE INSTRUCTIONS DANGER Risk of child entrapment. Before you throw away your old wine cooler, take off the doors. Leave the shelves in place so that children may not easily climb inside. As per UL 250 11.2.6 Thank you for using our Haier product.
Initial Set Up ..................7 Temperature Adjustment ................7 Shelving ....................9 Interior Light ..................9 Door Lock ....................9 Normal Operating Sounds ..............9 Proper Wine Cooler Care and Cleaning ........10 Cleaning and Maintenance ..............10 Power Interruptions ................11 Vacation and Moving Care ..............11 Troubleshooting................12 Warranty Information ..............13...
Unit Only Coldest Mid Range Mechanical Control Unit Only HVFM30A HVF030A 1. White Wine Button (-) 7. Door Handle 2. Red Wine Button (+) 8. Temperature Control 3. Interior Light Button (set) 9. Adjustable Leveling Legs (not shown) 4. LED Temperature Display 10.
Leveling Your Wine Cooler • Your wine cooler has four leveling legs which are located in the front and rear corners of your wine cooler. After properly placing your wine cooler in its final position, you can level your wine cooler.
• Make sure there is a suitable power Outlet (115 volts, 15 amps outlet) with proper grounding to power the wine cooler. • Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two plug outlet. This is a dangerous practice since it provides no effective grounding for the wine cooler and may result in shock hazard.
The control for this is on the back of the unit. There are 6 settings plus 0 (OFF). Initially set the temperature setting to 3. Let the unit run for at least 30 minutes to acclimate itself before making any adjustments.
There are two settings. If the knob hand points to the red color area, the cooler is set for red wine storage. If the knob hand points to the white color area, the cooler temperature is set for white wine stor- age.
Interior Light • To complement the look of your wine collection, a soft light has been built into the wine cooler. Simply push the "Light/Set" button on the electronic controlled unit, and the light comes on, push again for off.
Use sponge or soft cloth, dampened with the cleaning solution, to wipe down your wine cooler. • Rinse with clean warm water and dry with a soft cloth. • Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,concentrated detergents, solvents or metal scouring pads.
AC outlet. Vacation and Moving Care • For long vacations or absences, unplug the wine cooler and clean the wine cooler and door gaskets according to "General cleaning" section. Prop doors open, so air can circulate inside. When moving always move the wine cooler vertically.
TroubleShooting Wine Cooler Does Not Operate • Check if wine cooler is plugged in. • Check if there is power at the ac outlet, by checking the circuit breaker. Wine appears too warm • Frequent door openings. • Allow time for recently added wine to reach desired temperature.
What will be done? or consequential damages, so the above limitations may not apply to you. Some 1. We will repair or replace, at our dis- States do not allow limitations on how cretion any mechanical or electrical long an implied warranty lasts, so the part which proves to be defective in above limitations may not apply to you.
Page 15
IMPORTANTE No regrese este producto a la tienda Si tiene algún problema con este producto, por favor contacte el "Centro de Servicio al Consumidor de Haier" al 1-877-337-3639 (Válido solo en E.U.A). NECESITA UNA PRUEBA DE COMPRA FECHADA PARA EL SERVICIO DE LA GARANTIA...
Need help?
Do you have a question about the BC112G and is the answer not in the manual?
Questions and answers
we had a power surge now when plugged in it just chirps does not run no lights
Temperature shows LL. How do I get it to the 59 degrees I set it
To change the temperature on a Haier BC112G wine cooler:
1. Press and hold both the "White Wine" and "Red Wine" buttons for about 3 seconds to enter temperature set mode.
2. Use the "White Wine" button to decrease the temperature or the "Red Wine" button to increase it.
3. Each press changes the temperature by 1 degree.
4. Once you reach 59°F, press the "Light/Set" button to confirm.
5. The LED display will return to showing the current internal temperature.
There may be a 3-degree variance between the selected and displayed temperature.
This answer is automatically generated