Advertisement
Quick Links
Compliant model: M-XGS30UBS, M-XGM30UBS, M-XGL30UBS, M-XGXL30UBS
Thank you very much for purchasing this product.
* Each of the "M-XGS30UBS/M-XGM30UBS/M-XGL30UBS/M-XGXL30UBS" series is referred to as "this
product" in this manual except in some cases.
Precautions
This manual describes the necessary precautions you should take for safe operation of this
product.
Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.
Wired Mouse
M-XGS30UBSK series (S size)
M-XGM30UBSK series (M size)
M-XGL30UBSK series (L size)
M-XGXL30UBSK series (XL size)
User Manual
Advertisement
Related Manuals for Elecom M-XGS30UBSK Series
Summary of Contents for Elecom M-XGS30UBSK Series
- Page 1 Wired Mouse M-XGS30UBSK series (S size) M-XGM30UBSK series (M size) M-XGL30UBSK series (L size) M-XGXL30UBSK series (XL size) User Manual Compliant model: M-XGS30UBS, M-XGM30UBS, M-XGL30UBS, M-XGXL30UBS Thank you very much for purchasing this product. * Each of the “M-XGS30UBS/M-XGM30UBS/M-XGL30UBS/M-XGXL30UBS” series is referred to as “this product”...
- Page 2 Meaning of symbols WARNING Failure to observe precautions carries the possibility of serious personal injury or death due to fire, electric shock, or other causes. CAUTION Failure to observe precautions may result in personal injury due to electric shock or other causes, and may damage other equipment.
- Page 3 Do not put this product in fire. Breakage may cause fire or injury. Please do not remove or connect the USB connector with wet hands. In addition, do not modify or forcibly bend the product. It can cause a fire or electric shock. CAUTION Do not place this product in any of the following environments: In a car exposed to sunlight or a place exposed to direct sunlight.
- Page 4 quality and/or discolor this product. Please note the following for disinfection. Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant solution. Make sure there are no loose droplets and gently wipe the product using the cloth. After wiping, dry thoroughly and wipe off...
-
Page 5: How To Use
How to use Items included in this package The following are included in this package. Verify the package to ensure all items are accounted for prior to using this product. While every effort has been made to ensure proper packaging, in the event that any shortage or damage is discovered, please contact the retailer where the product was purchased. - Page 6 You will need to install the “ELECOM Mouse Assistant Mac version” from our website to use the “Back” and “Forward” button on Mac. Please refer to “Install ELECOM Mouse Assistant”. ⑥ Optical sensor The LED will light up blue when the power is on. This sensor will detect mouse movements when you move the mouse.
- Page 7 3) The driver will be automatically installed, and you will then be able to use the mouse. You can now use the mouse. By downloading and installing the "ELECOM Mouse Assistant" from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse...
- Page 8 ■ For Windows 11 1) Click on “Start” on the bottom of the screen and click on “Settings”. The “Settings” page will appear. 2) Click on “Bluetooth & devices” and then “Mouse”. 3) Adjust the “Mouse pointer speed” slider bar to adjust the mouse pointer movement speed.
- Page 9 From the Start menu, click the Settings icon, select “Devices” → “Mouse”, then click “Additional mouse options” under “Related settings”. 2) Select the “Pointer Options” tab. 3) Adjust the “Select a pointer speed” slider bar to adjust the mouse pointer movement speed.
- Page 10 3) Adjust the “Lines to scroll at a time” slider bar to adjust the number of lines per scroll. ■ For Windows 10 1) Open “Mouse” properties. From the Start menu, click the Settings icon, select “Devices” → “Mouse”, then click “Additional mouse options”...
- Page 11 Connecting to a PC 1) Start up a PC. Please wait until your PC has started up and can be operated. 2) Plug the USB connector into the USB-A port on a PC. You may use any USB-A port.
- Page 12 3) The driver will be automatically installed, and you will then be able to use the mouse. You can now use the mouse. By downloading and installing the "ELECOM Mouse Assistant" from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse...
- Page 13 1) Click “Mouse” under “System Settings”. The “Mouse” settings page will load up. 2) Adjust the “Tracking speed” slider to adjust the speed of the mouse pointer. Unchecking “Natural scrolling” will cause the scroll direction to be reversed. ChromeOS Connecting to a PC...
- Page 14 1) Start up a PC. Please wait until your PC has started up and can be operated. 2) Plug the USB connector into the USB-A port on a PC. You may use any USB-A port. For devices that do not have a USB-A port, please use a USB Type-C hub.
- Page 15 Removing the mouse This product supports hot plugging. You can remove the mouse even when the PC is running. 3) The driver will be automatically installed, and you will then be able to use the mouse. You can now use this product. Change the mouse pointer speed Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow.
- Page 16 ELECOM Mouse Assistant must be installed. “ELECOM Mouse Assistant” is a software that allows you to use the mouse more effectively. Using ELECOM Mouse Assistant, users can set the functions they want to the unique buttons and use them to perform the operations they want.
-
Page 17: Specifications
Specifications Connector type USB-A connector Compatible models USB port-equipped Windows OS, macOS, and ChromeOS devices Supported OS Windows 11, Windows 10, macOS Ventura 13, ChromeOS * Update for each new version of the OS or the installation of a service pack might be required. Sensor Resolution 2000 DPI Read method... -
Page 18: Troubleshooting
M-XGXL30UBS series: approximately 125 g / 4.4 oz * including cable Operating environment Temperature: 5 °C to 40 °C / 41 °F to 104 °F; humidity: up to conditions 90 % RH (without condensation) Storage environment Temperature -10 °C to 60 °C / 14 °F to 140 °F; humidity: up conditions to 90 % RH (without condensation) Troubleshooting... - Page 19 spread of infection through the equipment. Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant solution. Make sure there are no loose droplets and gently wipe the product using the cloth. After wiping, dry thoroughly and wipe off any residual liquid. * Do not spray any liquid onto the product directly.
- Page 20 2) Click ”All apps”. 3) Click ”Windows Tools”. The ”Windows Tools” screen will appears.
- Page 21 4) Double-click ”Control Panel”. 5) Click ”System and Security”.
- Page 22 6) Click ”Power Options”. 7) Click "Change plan settings" to the right of the item selected in "Power Plan". 8) On the ”Edit Plan Settings” screen, click “Change advanced power settings”.
- Page 23 9) On the ”Power Options” screen, click the ”+” mark in ”USB settings” from the list, and then click the ”+” mark in ”USB Selective Suspend Settings”. 10) In the drop box next to ”Settings”, select ”Disable”. If you are using a laptop, there are two items instead of “Settings”: “On battery” and “Plugged in”.
- Page 24 11) Click "OK" to confirm the settings. 12) Click the “X” (close) in the upper right corner to close “Edit Plan Settings”. For Windows 10 1) Right-click the Start button at the bottom left of the screen, click “Power Options”, and then click “Additional power settings”...
- Page 25 4) On the “Power Options” screen, click the “+” mark in “USB settings” from the list, and then click the “+” mark in “USB Selective Suspend Settings”. 5) In the drop box next to “Settings”, select “Disable”. If you are using a laptop, there are two items instead of “Settings”: “On battery” and “Plugged in”.
-
Page 26: Intellectual Property Rights
6) Click “OK” to confirm the settings. 7) Click the “X” (close) in the upper right corner to close “Edit Plan Settings”. Compliance status Model/모델명: M-XGLL30UBS www.elecom.co.jp/global/certification/ China / 中国 Korea / 대한민국 Taiwan / 台灣 Vietnam / Việt Nam... -
Page 27: Support Information
Specifications and external appearance of this product may be changed without prior notice for the purpose of product improvement. ELECOM is not responsible for any damages to, or failure of other devices caused by using this product. The images are for illustration purposes only and may differ from your actual product. - Page 28 Las especificaciones y la apariencia externa de este producto pueden modificarse sin previo aviso con el fin de mejorar el producto. ELECOM no se hace responsable de los daños o fallos de otros dispositivos causados por el uso de este producto.
- Page 29 As especificações e aparência externa deste produto podem ser alteradas sem aviso prévio para fins de melhoria do produto. A ELECOM não é responsável por quaisquer danos ou falhas de outros dispositivos causados pelo uso deste produto. As imagens são apenas para fins ilustrativos e podem diferir do produto real.
- Page 30 일본 외 다른 국가에서 구입하는 고객은 문의 사항이 있는 경우 제품 구입 국가의 대리점에 연락하 십시오. ‘ELECOM CO., LTD.(일본)’는 일본 이외의 국가에서 구입 또는 사용 문의에 대한 고객 지원을 제공하지 않습니다. 또한 일본어 이외의 외국어는 지원되지 않습니다. 제품의 교환은 ELECOM 보증...
Need help?
Do you have a question about the M-XGS30UBSK Series and is the answer not in the manual?
Questions and answers