Option Menu - Yamaha HTR-6130 Owner's Manual

Set menu

3 OPTION MENU

Use this menu to adjust the optional system parameters.
■ Display settings
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: – 4 to 0
Control step: 1
• Press 7 l to make the front panel display dimmer.
• Press 7 h to make the front panel display brighter.
■ Memory guard
Memory guard MEM.GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
• Select "OFF" to turn off the "MEM.GUARD" feature.
• Select "ON" to protect:
– sound field program parameters
– all set menu items
– all speaker levels
– SCENE template parameters
Note
When "MEM.GUARD" is set to "ON", you cannot select and
adjust any other set menu items.
■ Audio select
C)AUDIO SELECT
Use this feature to designate the default audio input jack
select setting for the input sources when you turn on the
power of this unit.
Choices: AUTO, LAST
• Select "AUTO" if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select "LAST" if you want this unit to automatically
select the last input mode used for the connected input
source (see page 31).
■ Parameter initialization
Use this feature to set all the parameters of the sound field
programs to the initial factory settings.
Choices: NO, YES
• Select "NO" to cancel the parameter initialization and
return to the previous menu level.
• Select "YES" to set all the sound field parameters to
the initial factory settings.
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize the sound field program parameters.
• You cannot separately initialize individual sound field
programs.
50
En
A)DISPLAY SET
B)MEMORY GUARD
D)PARAM. INI
■ Bluetooth setting
Start pairing START PAIRING
Use this feature to start pairing the connected Yamaha
Bluetooth adapter (such as YBA-10, sold separately) with
your Bluetooth component. For details about the pairing,
refer to "Pairing the Bluetooth™ adapter and your
Bluetooth™ component" on page 41.
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.
1
Select "START PAIRING" in "BLUETOOTH"
and then press 7 ENTER to start pairing.
The connected Bluetooth adapter starts searching
Bluetooth components. "Searching..." appears in the
front panel display.
2
Check that the Bluetooth component detects
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter,
"YBA-10 YAMAHA" (example) appears in the
Bluetooth device list.
3
Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
"0000" on the Bluetooth component.
Once this unit completes the pairing successfully,
"Completed" appears.
y
To cancel the pairing, press 8 RETURN to exit from
"START PAIRING".
Press 8 RETURN to exit from "START
4
PAIRING".
Notes
• If the connected Bluetooth adapter cannot find any Bluetooth
components, "Not found" appears.
• If a Bluetooth adapter is not connected to this unit, "No BT
adapter" appears.
E)BLUETOOTH