TP-Link Tapo P304M Quick Start Manual

Safety Information
•
Keep the device away from water, fire, humidity or hot
environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.
• The devices are not intended for use in locations where the
temperature may be less than actual room conditions, such as
unheated warehouses or garages.
• Plug the product into the wall outlets with earthing connection
through the power supply cord.
• Do not cover the power strip while in use. / nicht abgedeckt
betreiben.
• Risk of electric shock. Do not plug into another power strip or
an extension cord. / nicht hintereinander stecken.
• Timer & Schedule could turn-on unexpectedly without the user
being present.
• To Reduce the Hazardous Condition – Unplug the appliance
from the socket-outlet before servicing. / spannungsfrei nur bei
gezogenem Stecker.
CAUTION
To fully de-energize the appliance before servicing,
unplug it from the receptacle.
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
?
Need some help?
Visit https://www.tapo.com/support/
for technical support, the user guide,
FAQs, warranty & more
7106511100 REV1.0.0
Getting Started
1. Download Tapo App
Get the Tapo app from the App Store or
Google Play.
2. Power Up & Set Up
Open the Tapo app and tap the + button.
Select Plugs and then your model
the instructions to complete the setup.
©2024 TP-Link
Quick Start Guide
OR
Follow
.