Important Information - Beko 20LB330 Operating Instructions Manual

Important Information

LCD display panels are manufactured using an extremely high level of precision technology,
however sometimes some parts of the screen may be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
Cleaning the screen and the cabinet...
After turning off the power, clean the screen and the cabinet with a soft, dry cloth. We recommend
that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause
damage.
Disposal...
The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury, when the
set reaches the end of its useful life please dispose of it in accordance with Local Government
Regulations or at a recycling centre.
Connection of Mains Cable
Always use the mains cable supplied. First of all insert the mains cable into the input panel of the CTV, and only
thereafter in to mains supply socket.
ELECTRICAL CONNECTIONS
For your own safety read the following instructions carefully before attempting to connect this unit to the mains
supply.
For your convenience a mains lead and plug with a fuse has been supplied. For your safety please observe the
following information.
The moulded incorporates a 5A fuse. Should the fuse need to be replaced an ASTA approved BS 1362 fuse of
the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug
must not be used until a replacement fuse cover which must be the same colour as that visible on the pin face of
the plug has been fitted. Fuse covers are available from any good electrical store.
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug
fitted.
IMPORTANT! FITTING A DIFFERENT PLUG.
If the mains plug is cut off from the mains cable rewire the replacement plug in accordance with these instructions.
IMPORTANT
The wires in this
Blue - Neutral
Brown - Live
Yellow
Green-Earth
As the colours in the mains lead may not correspond with the coloured markings identifying the terminals
in your plug proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured
BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
RED.
The wire coloured green or GREEN/YELLOW must be connected to the terminal marked with letter E or
The television receiver must be protected by a 5A fuse if a fused plug is fitted. For any other plug fit a 5A fuse
at the distribution board.
Caution: - Under no circumstances should the discarded plug be inserted into a mains socket. To prevent shock hazard carefully
dispose of the discarded plug into your dustbin, do not leave the plug lying around where children might see it.
mains lead are
GREEN
GREEN/YELLOW
coloured in accordance with the following code:
5 A FUSE
-4-
.