Using The Tv - Beko 17WLB450S Operating Instructions Manual

Using the TV

Turning on for the first time and Tuning
TV controls
Stand-By mode
When your TV is working, press the
red "STAND-BY" button on the right
upper corner of your remote control
to switch off and the Stand-By indicator
(Led) will be brighter. To turn on your
TV again, press the numeric buttons,
or Program up or Program down.
Please Note: If you will not use your TV for
a long period, do not leave it on Stand-By
mode, instead switch it off from the power
button on the side panel of the TV set.
Programme selection
Press the Program up/Program down
buttons on the TV or on the remote
control or press a Numeric button to
select a programme.
1
T o select a programme whose number
is greater than 9 using the numeric
buttons, press the -/-- button first and
-/--
then press the two Numeric buttons.
For example, to select programme
1
12, press the -/- button followed by
2
1 then and 2.
You can also select a program by
pressing the Yellow button to see the
Program Table.
Use the Program up and Program
down buttons to scroll through the
programme numbers. When you
find the program number you want
press the OK button.
OK
Press the TV/TX button to close the
Program Table.
Volume
Press the Volume + or Volume - button
on the TV or the Vol
on the remote control. A sound level
bar will appear on the screen.
Mute
T o mute the sound press the Mute button
on the remote control. A loudspeaker
symbol will appear on the screen.
-10-
or Vol button