Do you have a question about the HS-002 and is the answer not in the manual?
Questions and answers
Trena Anderson
January 28, 2025
How do I connect 4 sensors to alarm each with their own unique tone?
I have had two that have are on two different driveways with alarms in two different homes but with in close enough proximity that it will alarm in both homes with different tones depending on which sensor is set off. I want to add two more so that I have a total of 4 sensors on 4 different driveways with each driveway having its own tone and an alarm in each of the 4 homes so that we know which driveway is being entered.
1 comments:
Mr. Anderson
February 10, 2025
The eMACROS HS002 Pro 2 allows users to connect multiple sensors and assign unique chimes to each. To connect four sensors and set unique tones:
1. Power on the Receiver – Ensure the receiver is turned on and ready to pair. 2. Enter Pairing Mode – Press and hold the pairing button on the receiver until it enters learning mode. 3. Trigger Sensor 1 – Activate the first sensor (wave your hand in front of it) so the receiver detects it. 4. Select a Unique Chime – Use the receiver’s controls to choose a specific chime for Sensor 1. 5. Save the Setting – Confirm the selection according to the receiver’s instructions. 6. Repeat for Each Sensor – Follow the same steps for Sensors 2, 3, and 4, assigning a different chime to each.
Once completed, each sensor will trigger its assigned chime when activated.
This answer is automatically generated
Jane Thomas
April 14, 2025
The alarm is saying ____ power low. Please advise
1 comments:
Mr. Anderson
April 15, 2025
When the eMACROS HS-002 alarm indicates low power, it means the sensor's battery may be running low. You should charge the sensor and check if the blue light stays on or keeps flashing to determine if the battery is defective.
This answer is automatically generated
Judy
April 24, 2025
I had to do an update and now the base station will make the sound but the app will not connect to it. I no longer can use the app. What do I do?
Need help?
Do you have a question about the HS-002 and is the answer not in the manual?
Questions and answers
How do I connect 4 sensors to alarm each with their own unique tone? I have had two that have are on two different driveways with alarms in two different homes but with in close enough proximity that it will alarm in both homes with different tones depending on which sensor is set off. I want to add two more so that I have a total of 4 sensors on 4 different driveways with each driveway having its own tone and an alarm in each of the 4 homes so that we know which driveway is being entered.
The eMACROS HS002 Pro 2 allows users to connect multiple sensors and assign unique chimes to each. To connect four sensors and set unique tones:
1. Power on the Receiver – Ensure the receiver is turned on and ready to pair.
2. Enter Pairing Mode – Press and hold the pairing button on the receiver until it enters learning mode.
3. Trigger Sensor 1 – Activate the first sensor (wave your hand in front of it) so the receiver detects it.
4. Select a Unique Chime – Use the receiver’s controls to choose a specific chime for Sensor 1.
5. Save the Setting – Confirm the selection according to the receiver’s instructions.
6. Repeat for Each Sensor – Follow the same steps for Sensors 2, 3, and 4, assigning a different chime to each.
Once completed, each sensor will trigger its assigned chime when activated.
This answer is automatically generated
The alarm is saying ____ power low. Please advise
When the eMACROS HS-002 alarm indicates low power, it means the sensor's battery may be running low. You should charge the sensor and check if the blue light stays on or keeps flashing to determine if the battery is defective.
This answer is automatically generated
I had to do an update and now the base station will make the sound but the app will not connect to it. I no longer can use the app. What do I do?