Download
Share
Print this page
Jebao SCP-180M User Manual
  1. Manuals
  2. Brands
  3. Jebao Manuals
  4. Water Pump
  5. SCP-180M
  6. User manual
Jebao SCP-180M User Manual

Jebao SCP-180M User Manual

Wi-fi wavemaker
Hide thumbs

Advertisement

Quick Links

Download this manual
Wi-Fi WAVE MAKER
USER'S MANUAL
WARNING：
●Please use the adapter and related accessories.
●Do not put the pump in the flammable, explosive and corrosive liquid.
●Do not use the pump in the water temperature above 35℃.
●Maximum water depth 1.5M.
●Please refer to the reference table to use this product
●Do not immerse the plug into water or other liquid.
●Do not allow children or the inexperienced to operate and play with the
product alone without safety guarantee.
●Please refer to actual products and APP.
SCP、SLW、SOW SERIES

Advertisement

loading
Need help?

Need help?

Do you have a question about the SCP-180M and is the answer not in the manual?

Questions and answers

Related Manuals for Jebao SCP-180M

Summary of Contents for Jebao SCP-180M

  • Page 1 Wi-Fi WAVE MAKER USER’S MANUAL WARNING： ●Please use the adapter and related accessories. ●Do not put the pump in the flammable, explosive and corrosive liquid. ●Do not use the pump in the water temperature above 35℃. ●Maximum water depth 1.5M. ●Please refer to the reference table to use this product ●Do not immerse the plug into water or other liquid.

  • Page 2: Function Feature

    I. Introduction Jebao wave makers are well designed as a good equipment to stimulate the natural sea environment by high technology, which offers a natural environment for different sea livings in the fish tank or in the pond. Before assembling and operating correctly, please read the manual carefully.

  • Page 3: Product Specification

    II.Product Specification Wave pump has various models and specifications : ●SLW -10M, SLW-20M, SLW-30M; ●SCP-65M, SCP-90M, SCP-120M, SCP-150M, SCP-180M; ●SOW-5M, SOW-9M, SOW-16M, The user could choose a variety of pumps according to their need.
  • Page 4 III. Assembly Notice 1. Suitable for different size of fish tank, the tank thickness of less than 15mm would be better. 2. Accessories:include wireless controller, adaptor, power cable, pipe connector, user’s manual. 3. Pump assemble: Take away the magnet at the back of the pump basket, locate the pump in the center of the fish tank inside and suck it closely by the rubber pad and shift the magnet slant to the same position on the outside wall.

  • Page 5: Operation And Function

    IV. Operation and Function : this description does not apply to wave maker of the SLW-xxM range Wi-Fi pump. A. Button and Knob MODE/PROGRAM: Short press to select each function mode, long press to exit timing mode. SPEED/FEED: Press the button to adjust the flow rate and enter to the Feed mode by long press the “FEED”...
  • Page 6 bright and enter into Slave mode, where the controller function is invalid except adjusting flow rate by rotate the knob. Among two or more wave makers in a group, set one controller as the Master control and the other as Slave control. All the pumps will keep the same performance through adjusting the Master controller.
  • Page 7 Else: Random Wave Mode One or more pumps can operate at the same time. It is a random mode of the pump power changed in a random data all the time without regulation. H: Constant Wave Mode One or more pumps can operate at the same time. In constant flow. Flow rate can be adjusted by “SPEED/FEED”.
  • Page 8 lights because Red, means the setting is locked. Wave patterns and shift time is fixed without change. It protects the wave pattern and time to be changed if adjust the knob or button. Long press the “Wi-Le/LOCK” button to recover until the red “LOCK” indicator light dark.
  • Page 9 ●Explanation of Wi-Fi Indication Light A. Wi-Fi indication light blinking alternately in green and red while the Pump is on smart configuration mode. B. Wi-Fi indication light is blinking simultaneously in green and red while the Pump is on AP configuration mode and and AP direct connection mode C.
  • Page 10 APP Download and Instruction 1. Download The APP name “Jebao Aqua”, is available in App Store for Apple users and Google Play for Android system users. User can search “Jebao Aqua” in either APP Store or Google Play to download the application. Alternately user can scan the below barcode on the package or user’s manual to download the...

  • Page 11: App Instructions

    ①Open Jebao Aqua App and tap Create new account; ②Fill in the information as required and tap Create account； ③After registration, return to the login page and put the account and password to log in. Note: please use Email to register, Phone number registration is valid for mainland China only 2.2 Reset Password...
  • Page 12 Tap Add Now or “+” icon on the upper right side to add your devices, tap “Wave Pump” icon . Configuration mode: Make sure your phone is connected to 2.4G band Wi-Fi before configuration. There are two types of configuration modes, Smart configuration and AP configuration modes.
  • Page 13 Check the sentence “Device is in smart configuration mode “and tap “Next” to start smart configuration.
  • Page 14 Follow the instructions. Input the correct Wi-Fi password and tap “Next” Make sure your device, phone, and router are as close as possible during the configuration progress. The page will display all the devices. Choose the device you want to add and tap on the device name, then tap Confirm to add.
  • Page 15 simultaneously. The Device come into the AP configuration mode. Tap “AP Network “in the upper right corner of the Add device page to enter into AP configuration. Check the sentence “Device is in AP configuration mode “ and tap “Next”...
  • Page 16 Input the Wi-Fi password and tap Next. Note: Due to different operating system, IOS and Android will be different in operation in the following details. IOS System： After entering the Wi-Fi password, you need to switch the Wi-Fi of the phone to "Jebao_WiFi-xxxx",as below.
  • Page 17 Tap “Go to settings” Tap “Settings” in the upper left corner to enter the mobile phone settings page. Go to Settings > Wi-Fi and connect to Jebao_WiFi-xxxx” with password 123456789.
  • Page 18 123456789 After successful connection, tap Jebao Aqua on the upper left corner to return to the APP. The configuration starts automatically. Tap Start to control the device after the device has been added successfull...
  • Page 19 Android ： After input the Wi-Fi password, need to manually switch the Wi-Fi connection "Jebao_WiFi-XXXX". The specific operation is as follows. Click”Confirm”,Enter the mobile phone Wi-Fi setting page.
  • Page 20 On the Wi-Fi Settings screen.Switch the Wi-Fi of the mobile phone to "Jebao_WiFi-XXXX" with the password 123456789. After successful connection, wait for a moment, and the software will indicate that the connection has been added successfully.Tap "Start" to control the device.
  • Page 21 ③ Hotspot(AP direct connection) Press the Wi-Fi button of the device for 10 seconds until the red and green lights of the status light flash and let go. 1. In the APP login interface,tap the Access Point (direct) connection at the bottom right or tap the login to enter the main interface and select the Access Point (direct) connection in Settings.
  • Page 22 2. Select the device type, check the confirmed device to enter AP hotspot mode and tap Next. 3. Select the Wi-Fi name of the device, tap Confirm .Jump to the phone Wi-Fi setting interface. 4. Select the hotspot "Jebao_WiFi-xxxx" issued by the device (the name is the same as the device name).
  • Page 23 5. Enter the password 123456789 and tap Connection.Manually return to APP after successful connection. 5. Wait for the device to connect, and tap the device to enter the control interface. Notice： 1. You may be asked to restart configuration process all over again if the Wi-Fi password input is incorrect.
  • Page 24 close as possible. 3. The green indicator light stays on after successfully connection. (Indicator light does not change after AP direct connection) 4. AP direct connection is only suitable for close control of the device in a non-Wi-Fi environment.(Manual calibration time is required when the equipment is directly connected to AP after delivery.
  • Page 25 In my device interface, long press the device icon for 2 seconds to enter the device control interface. Manual mode settings ： In the device control interface, long press the bottom manual icon for 2 seconds to enter the manual mode setting. Switch button Making waves set Enter the manual setting interface and switch the wave-making...
  • Page 26 flow value and frequency of wave-making. Classic mode： Press or drag the bar to adjust the flow and the frequency. The minimum flow is 30%. The minimum frequency is 5%. Pulse or circulation can be chosen. Sine Wave Mode： Press or drag the bar to adjust the flow and the frequency.
  • Page 27 The minimum flow is 30%. Random wave mode constant wave mode Feed mode ： The feeding switch should be turned on. After setting the feeding duration time, click "confirm". During the feeding period, the pump will stop working. Feeding duration setting...
  • Page 28 Timer mode： In the device control interface, press the Timer icon of mode setting for 2 seconds to enter the Timer setting. ④ Time period switch button ① Adjust the time slider ③ End time Start time ② ⑤ Click into wave making mode selection and parameter setting Double-click the blank area of the ring to add the plan time period or use the switch button to switch to the blank area of...
  • Page 29 Click finish to save plan setting. Clicking delete will delete the current scheduled period. Parameter setting Mode selection and setting Time period setting Linkage mode setting ： In the device control interface, click "Linkage" button to enter linkage settings. In the linkage mode, two or more wave pumps are required in a group.
  • Page 30 Main control function Settings: Manual setting page Timing setting page...
  • Page 31 Slave control function Settings: Slave control can only set the flow and the speed, the function is determined by the main control. 4. Pump Management On the device’s main page, tap on upper right-hand side to device management page. User can calibration time,rename, delete device.
  • Page 32 1. The factory time of the equipment may not be accurate, so the first time to use the AP direct connection mode of the mobile phone needs to set the calibration time (tap the set time). Set Time 2. Users can also change the name of the pump to facilitate management.
  • Page 33 Delete Device 5. Trouble shooting tips When the Wi-Fi module doesn’t communicate with the driver, the connection failure will be indicated. VIII. Warning 1. To ensure the product performance, do not run without water. 2. Select a dry place to locate the controller to prevent water splashed on it.
  • Page 34 fish tank. 4. Don’t disassemble the controller and adaptor without professional guidance. Error reminder and resolution...
  • Page 35 IX. Maintance 1. Clean the controller regular to ensure good performance. 2. Clean the controller surface with dry cloth if there is any water to prevent water inflow into controller. 3. Remove the waste in the pump by rotating the basket in anti clockwise to open and lock in clockwise direction.
  • Page 36 By collecting and recycling waste, you help save natural resources, and make sure the product is disposed in an environmental friendly and healthy way. Jebao Co.,Ltd. Add：Tongmao Industrial Park, Xiaolan Town, Zhongshan, Guangdong, China. Tel：+86-760-28136708, 28136720 E-mail：info@jebao.com Website: http://www.jebao.com...

This manual is also suitable for:

Scp-120m
Save PDF