Epomaker RT100 Manual

Hide thumbs Also See for RT100:

Download this manual

1. Please ensure the RT100 is connected in wired mode (with cable), the mode switch is set to USB, and

Win/Mac is correctly chosen.

2. Download the Driver, install it. Then, right-click and run the driver as administrator.

If the Driver is in Chinese, you can change the language here: ①→②→Choose English. (Please

select English or Chinese, and not auto)

If the mini-display display abnormally, ( such as showing incorrect information, fuzzy image, or

stuck on the wrong language ),

Push the mini display into the keyboard firmly or adjust the angles a bit until connection is

proper.

ii.

In the EPOMAKER Driver, updating the firmware at Support > Firmware > Upgrade.

Please make sure the RT100 is the only keyboard connected to the computer during the

iii.

firmware upgrading .

iv.

The latest firmware version is V504-OledV505.

3. How to sync time ( Screenshot credit: https://www.youtube.com/watch?v=XJ9-drqI9tc )

Need help?

Do you have a question about the RT100 and is the answer not in the manual?

Page 1 1. Please ensure the RT100 is connected in wired mode (with cable), the mode switch is set to USB, and Win/Mac is correctly chosen. 2. Download the Driver, install it. Then, right-click and run the driver as administrator. If the Driver is in Chinese, you can change the language here: ①→②→Choose English. (Please...
Page 2 Tips: this feature is only available on EPOMAKER_setup_1.2.69(WIN2023069) or higher version. You can contact our support team for the latest version if it is not available at Epomaker Download Page. Make sure to run the driver as administrator and you are logged in.
Page 3 After that, click on “upload gif”. Wait until the progress bar gets 100%, and the upload should be successful. Please do not use the RT100 or the computer while gif is uploading and wait until the progress bar gets 100%.