Wireless Audio Receiver Led Status - Dell WL7024 User Manual

Function
Reject the incoming call.
Downlink noise reduction.
(Incoming audio noise cancellation when
calling.)
NOTE: Downlink noise reduction
focuses solely on speech-vocals. For
example, if you are using a phone and
someone plays music during the online
meeting then you can activate this
feature to remove the interfering music
from the conversation.

Wireless audio receiver LED status

Table 10. Wireless audio receiver LED status.
Status
Headset is not connected.
In pairing mode
Headset is connected but no Teams.
Headset is connected, Teams is not active and not signed in.
Headset is connected, Teams is active but not signed in.
Headset is connected but sign-in to Teams has failed.
Headset is connected, Teams is running and signed in.
Headset is connected, Teams is running and signed in, Teams
notifications, missed call, voice mail, or meeting alert is displayed on
the screen.
Headset is connected, and the microphone is muted.
Headset is connected, and the microphone is unmuted.
Action
Touch and hold
Tap three times on the touch zone.
Wireless audio receiver LED
Flashes blue
Rapidly flashes blue.
Static blue
Flashes purple for 10 seconds and then goes to the previous state.
Flashes purple for 3 times and then lights up in blue.
Flashes purple for up to 70 seconds and then lights up in blue.
Static purple
Flashes purple for up to 5 minutes until the user acts on it.
Static red
Static green
Using the headset
25