Installation requirements To ensure a successful installation of the Xonar D2X audio card, your computer must meet the following requirements: • One PCI Express 1.0 (or higher) compatible slot for the audio card • One available 4-pin power cable from PC’s power supply unit •...
Connect the power cable of the power supply to the power connector on the audio card. Align and insert the audio card into the PCIE slot until it seats in place. Make sure the goldfingers are properly inserted to the slot.
Driver installation After installing the Xonar D2X audio card on your computer, you need to install the device driver that enables the Xonar D2X audio card to work with Windows operating system. The version and content of the driver CD are subject to change without notice.
Connecting speakers LED color definition This audio card comes with LEDs in different colors that defines each port. MIC In Line In Blue Front Out Green Orange Side Surround Center & Subwoofer White Back Surround Amber No LED SPDIF In...
Page 9
S/PDIF in port to the optical adaptor with the TOSLINK optical cable You can also use a coaxial cable for a S/PDIF connection. Just plug the coaxial RCA male connector to the S/PDIF-Out combo jack and connect the other end into the coaxial S/PDIF input on your decoder.
Need help?
Do you have a question about the XONAR D2X - Sound Card - 192 kHz and is the answer not in the manual?
Questions and answers