Advertisement
Quick Links
C1 Harness for Alliance MDC
Laundry Installation Guide
For BluKey™ Pro Serial/Pulse and BluKey™ Pulse Devices
Harness - "Laundry C1: Alliance (MDC)"
BluKey™ Pro Serial
BluKey™ Pulse
BluKey™ Pro Pulse
Alliance Laundry Systems Machines with
MDC/Centurion Controllers
Advertisement
Related Manuals for PayRange C1
Summary of Contents for PayRange C1
- Page 1 C1 Harness for Alliance MDC Laundry Installation Guide For BluKey™ Pro Serial/Pulse and BluKey™ Pulse Devices Harness - “Laundry C1: Alliance (MDC)” BluKey™ Pro Serial BluKey™ Pulse BluKey™ Pro Pulse Alliance Laundry Systems Machines with MDC/Centurion Controllers...
- Page 2 PayRange Laundry System 3 BluKey Pro 2 Laundry Interface Kit Coin-Op Machine “C1” Harness BluKey to Machine BluKey™ Pulse Supported Machines Alliance Laundry Systems with these controllers: Centurion Galaxy™ 400 / 600 Quantum™ Silver / Gold Tips: 4-pin power connector (H1) may be on separate circuit board in large-chassis equipment.
- Page 3 A special jumper is required to be plugged in to the machine control board to tell the control to operate in ‘Card’ mode. Insert serial jumper into the 6-pin port on the board (not provided by PayRange). Pulse Mode: Review Owner’s Manual provided with machine for process to enter set up mode) Configure Machine Controller Programming 1.
- Page 4 BluKey Installation Steps IMPORTANT: PayRange service requires data connection on a user’s mobile device. Prior to installation, verify location has adequate cellular reception or a WIFI network that users can access. Step 1: Prepare Machine o Disconnect machine from power.
- Page 5 Number Decal – a unique number decal must be affixed to every laundry machine equipped with PayRange. Number decal not used for vending applications. o The decal should be placed on the machine in an area that is easily visible (near the coin slot is recommended) and that makes it obvious which machine the number is for.
- Page 6 2. Insert a card into the reader – verify normal card operation and machine can start. 3. Rapid advance machine to clear cycle 4. Select the machine in the PayRange App and swipe to pay – verify machine displays PayRange balance (or value of free purchase code) and can start.
Need help?
Do you have a question about the C1 and is the answer not in the manual?
Questions and answers