7. Do not block any ventilation openings. Install in accordance 14. Refer all servicing to qualified service personnel. Servicing Class B digital device, pursuant to part 15 of the FCC Rules. These limits are with the manufacturer’s instructions. is required when the apparatus has been damaged in any designed to provide reasonable protection against harmful interference in a 8.
Bi-amplification – The Harman Kardon Go + Play II unit uses two amplifiers to allow for clean, powerful sound output. RF remote – Allows for control of the Harman Kardon Go + Play II system from up to 29 feet (nine meters) away.
5. Connect the power supply into the “DC In” jack. 6. Plug the adapter into the wall outlet. 7. If using batteries is preferred, install eight (8) type D batteries into the bottom of the unit. 8. Turn on the power switch. The green indicator light will turn on.
The remote control will work only with compatible iPhone/iPod models. Before proceeding, make sure To turn the unit on: Press and hold either volume button. that the iPod is securely docked to your Harman Kardon Go + Play II. The Music Control Mode is To turn the unit off: Press and hold the button.
8 type D alkaline batteries Ground loop (an Turn the Harman Kardon Replacement battery for unsuitable connection). Go + Play II unit off and connect RF remote: 3V type 2032 battery it to another wall outlet. Drivers: Two Ridge and two Atlas transducers ™...
Page 8
Harman Kardon Go + Play and Atlas are trademarks of Harman International Industries, Incorporated. iPhone, iPod, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. "Made for iPod" and "Made for iPhone"mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Need help?
Do you have a question about the HK GOPLAY II and is the answer not in the manual?
Questions and answers