IRIS-W10 series - System integration manual
2.9 JTAG and SWD Debug interface
IRIS-W10 modules support both Serial Wire debug (SWD) and JTAG debug (software download), see
EVK-IRIS-W10 User guide
[3].
When designing an application product with IRIS-W1, the SWD interface pins to the module
(SWDCLK, SWDIO) and JTAG pins (JTAG_TCK, JTAG_TDI, JTAG_TDO, JTAG_TMS, JTAG_TRSTn)
should ideally be made accessible in the application design.
Flash IRIS-W10 over the UART or SWD interface. The module is preloaded with bootloader software,
which is without security. A debug connector to the module is also useful for software development.
For security reasons, disable the debug interface to prevent the upload or download of insecure
software – or software that has not been validated.
2.10 Integrated thermal management
RW612 includes an integrated thermal management engine.
2.11 Reserved pins (RSVD, aux)
Don't connect any reserved (RSVD) pins. The reserved pins can be allocated for future interfaces and
functionality.
UBX-23003263 - R04
Module integration
Page 19 of 62
C1 - Public
Need help?
Do you have a question about the IRIS-W10 Series and is the answer not in the manual?
Questions and answers