Advertisement
Quick Links
This quick start guide includes the basic steps required to install and connect to your Media Gateway/
SRT Gateway server.
For detailed configuration and operation information, please refer to the User's Guide (available at
https://doc.haivision.com). For the default credentials, refer to the Important Notice document (shipped
with the appliance or available on the Haivision Support Portal at http://support.haivision.com).
Safety Guidelines
Use the following guidelines when unsafe conditions exist or when potentially hazardous voltages are
present:
•
Always use caution and common sense.
•
To reduce the risk of electrical shock, do not operate equipment with the cover removed.
•
Repairs must be performed by qualified service personnel only.
Improper handling and/or installation practices of sensitive equipment may VOID the warranty.
Caution
When handling components, or when setting switch options, always use an antistatic wrist strap
connected to a grounded equipment frame or chassis. If a wrist strap is not available, periodically
touch an unpainted metal surface on the equipment. Never use a conductive tool, such as a
screwdriver or a paper clip, to set switches.
HMG and HSG 3.7
Server Quick Start Guide
Server Quick Start Guide
Haivision Gateway Server, Version 3.7
1
www.haivision.com
Generated on: 2024-01-25 04:24:51
HVS-ID-QSG-MGW-3.7
Advertisement
Related Manuals for Haivision S-MG-500
Summary of Contents for Haivision S-MG-500
- Page 1 SRT Gateway server. For detailed configuration and operation information, please refer to the User's Guide (available at https://doc.haivision.com). For the default credentials, refer to the Important Notice document (shipped with the appliance or available on the Haivision Support Portal at http://support.haivision.com).
-
Page 2: Connecting The Server
To connect the server: Open the box, verify the contents, and visually inspect the items for any shipping damage. If necessary, contact Haivision for return instructions. Unpack the box and position the hardware on a stable work surface. Optionally, mount the device in a server rack. - Page 3 S-MG-200/S-SG-20 Server S-MG-500/S-SG-50 Server Front (S-MG-500/S-SG-50 server) Back (S-MG-500/S-SG-50 server) LED Status Indicators (S-MG-500/S-SG-50 server) The LED colors and flashing (blinking) speed indicate the status (operational state) of the server. Indicator Icon Description...
-
Page 4: Changing The Network Settings
Changing the Network Settings Note After first boot, the device is configured for a static IP address as defined in the Important Notice . Prior to accessing the main Web interface, you must configure the device with a valid IP address and gateway to work in your environment. -
Page 5: Accessing The Web Interface
After pressing Enter, it takes a few seconds for the settings to be saved. The system may seem unresponsive during this time. Select Log Out and then press the Enter key to exit the Console UI. For more details, refer to Using the Console UI with Haivision Hardware. Accessing the Web Interface ... - Page 6 Enter the device's assigned IP address. For example, if the IP Address is 10.5.1.4, enter a URL of https://10.5.1.4. When a browser accesses the website, it requests a security certificate to confirm that the site is trusted. The device ships with a self-signed SSL certificate key set which works with any configured server hostname.
-
Page 7: Obtaining Documentation
For more information, please visit our website at: https://www.haivision.com/environment. Obtaining Documentation This document was generated from the Haivision InfoCenter. To ensure you are reading the most up-to- date version of this content, access the documentation online at https://doc.haivision.com. You may generate a PDF at any time of the current content. See the footer of the page for the date it was generated.
Need help?
Do you have a question about the S-MG-500 and is the answer not in the manual?
Questions and answers