North Edge MARS 3 Instruction Manual page 15

To synchronize the analog clock and set the time on the North Edge MARS 3:

1. Enter Time Setting Mode:
- In time mode, press and hold the [A] key for 5 seconds until "[SUB]" starts flashing. This enters the day hand adjustment mode.

2. Adjust the Week Hand:
- If the week hand is not pointing to [SU], use the [C] key to move it there.

3. Enter Hour and Minute Hand Adjustment Mode:
- Press the [B] key. When "0:00" starts flashing, you are in the hour and minute hand adjustment mode.

4. Adjust Hour and Minute Hands:
- If the hands do not point to 12:00, use the [C] and [D] keys to move them to the 12:00 position.

5. Finish and Save Settings:
- Press the [A] key to return to time mode.

Note: If no key is pressed for 2–3 minutes during setting, the system will exit and save the current settings automatically.

This answer is automatically generated

To confirm and save the regulation of the lancet (hands) on the North Edge MARS 3:

1. In time mode, press and hold the [A] key for at least 5 seconds until [SUB] starts flashing to enter the day hand adjustment mode.
2. Use the [C] key to move the week hand to the [SU] position if it is not already there.
3. Press the [B] key; when [0:00] starts flashing, the hour and minute hand adjustment mode is active.
4. Use the [C] and [D] keys to set the hour and minute hands to the 12:00 position.
5. Press the [A] key to confirm and return to time mode.

Settings are automatically saved if no key is pressed for 2–3 minutes.

This answer is automatically generated