RS PRO 264-1017 Instruction Manual page 2

MECHANICAL INSTALLATION
WIRING
1 Channel
3P4W or
1P2W P1,P2 or P3
CT phase rotation is
RH/LH dependant
refer to Configuration
3 CH 1P2W-P1 (3x L1)
Modbus
Typical Modbus
configuration shown
Wiring Topology A | B
+ -
Modbus
|
DISMOUNT
3 CH 1P2W-P2 (3x L2)
Daisy Chain Star Network
✓ 
DIN rail mounted, this device must be installed within
a suitable IP rated enclosure. Indoor use only.
The meter is intended to be installed in Mechanical
Environment 'M1', with Shock and Vibrations of low
significance, as per 2014/32/EC Directive.
The meter is intended to be installed in Electromag-
netic Environment 'E2', as per 2014/32/EC Directive.
Installation Category III (300V L-N)
Protection Class: II
1 RJ45 cable
0.5 Nm
2 Fuse class CC UL / fast acting
Max
3 Phase 600V/Single Phase 250V
No. Meters
Fuse Rating
3 Supply 31 additional meters (32 total)
4 For 'Volt-free' PLC or digital input, voltage must
be provided by the addition of a DC PSU
5 For Single Phase Easywire CT - Set Phase
Network to 1P2W-P1, Voltage Reference V1
must be same phase as CT. Connect V2/V3 to N.
Single Core
0.5 > 4mm
Ø 2.5mm Max
7mm
3 CH 1P2W-P3 (3x L3)
500m Max, ≤ 32 meters
Pollution degree: II
≤ 5 ≤ 10 ≤ 20 ≤ 32
0.5A 1A 1.5A 2A
2
Stranded
0.5 > 2.5mm
+
264-1017-IM-V01
2
Ø 2.5mm
2