HDPEAK MF-PC01 User Manual

HDPEAK MF-PC01 User Manual

Cordless robotic pool cleaner

Advertisement

User Manual
CORDLESS ROBOTIC POOL CLEANER
MODEL: MF-PC01
Subject to update by manufacturer without prior notice

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MF-PC01 and is the answer not in the manual?

Questions and answers

Summary of Contents for HDPEAK MF-PC01

  • Page 1 User Manual CORDLESS ROBOTIC POOL CLEANER MODEL: MF-PC01 Subject to update by manufacturer without prior notice...
  • Page 2 Important Precautions Strictly prohibit using the cleaner beyond its operating conditions. Please read the manual carefully, and use it according to the manual. We have no responsibility for any loss or injury caused by improper use. Use the accessories recommended or sold by the manufacturer only. This model mainly applies to swimming pools with flat floor.
  • Page 3 if not charging the battery for a long time, which will lead to fatal damage to the battery if continuing too long. Please be careful. Prohibit charging the battery under the condition of fire or extreme heat. Do not use or store the cleaner near the heat source. Prohibit piercing the cleaner shell with nails or other sharp objects, and prohibit hammering, impacting and throwing the cleaner.
  • Page 4: Table Of Contents

    Contents I.Introduction II. Appearance characteristics & structure III.Specifications IV. Operation instruction V. Trouble Shooting VI. Packing list VII. Warranty - 03 -...
  • Page 5: I.introduction

    Introduction The robotic pool cleaner MF-PC01 is a new type of rechargeable automatic cleaning equipment for pools with the function of automatic beaching. Please read the manual carefully before use so that you can use it correctly. Appearance & structure...
  • Page 6: Operation Instruction

    13. Moving speed: appr.70ft/min or 18m/min 14. IP Grade: IPX8 15. Charging environment temperature: (32°F) - (113°F)/0°C 45°C 16. Max. water depth: 6.56ft or 2.0m 17. Size: 16.5(L)*11.4(W)*9.4(H) inches or 420(L)*290(W)*240(H)mm 18. Weight: 10.6lb or 4.8kg 19. Storage condition: Short term(Iess than 1 month): (-4°F) - (+140°F)/(-20°C)-(+60°C)≤75%RH Medium term (Iess than 3 months): (-4°F) - (+113°F)/(-20°C)-(+45°C)≤75%RH Long term (more than 3 months):(-4(-4°F) - (+68°F)/(-20°C)-(+20°C)≤75%RH 20.
  • Page 7 Please ensure that top cover of the cleaner is tightly assembled with its chas- sis. Do not touch the wall to avoid scratching the wall or damaging the cleaner. when putting into or lift out from pool. It is necessary to stay on the water surface for 10-15 seconds until water flows out from the cleaner to the pool before being placed on the ground.
  • Page 8 Functions and adjustment of nozzles There are two nozzles on the cleaner, one of them opens once the other closes. Water flows out through the open nozzle to thrust the cleaner to move forward. Adjust the nozzle by turning it to control the moving route.
  • Page 9 Setting Two: 0°- 40°, when the cleaner does not have a full coverage of pool. Nozzle angle Moving route - 08 -...
  • Page 10 Setting Three : 20°- 20°, for round pools. Nozzle angle Moving route Note: above are recommended settings and different settings might apply to specific pools. So the operator can set according to the principle of nozzle settings and the actual situation of the pool. - 09 -...
  • Page 11 Clean the filter tray Open the cleaner by clips Take off the filter tray Clean the filter tray and chassis - 10 -...
  • Page 12: Trouble Shooting

    e.Push the clips on Reassemble the cleaner Trouble shooting Symptom Possible reason Solution The cleaner does not Low remaining battery Charge the battery work and the indicator capacity light is red flashes. Charge the battery and power on the cleaner to The cleaner does not Battery protection watch...
  • Page 13: Packing List

    15 degree. Item Name Model QTY (pc) Application Remark Cleaner body MF-PC01 In carton Adapter In carton User manual In carton Brush In carton Floating handle In carton - 12 -...
  • Page 14: Warranty

    manufacturer. - 13 -...
  • Page 15 Your Service Includes 12-Month Coverage Within 12 months of purchase, we will provide timely and effective online after-sales service.We will repair or replace any defective product (due to manufacturing fault) within the service period. How to Return Your ENGINDOT Product Contact us with your order number.

Table of Contents