Table of Contents
Advertisement
Functional/Performance Verification Tests
9. Hard Drive Self Test
9.1 Issue the TAP command HS (Hard Disk Self Test). You will receive an "OK" response. The test
will run for 2 minutes.
9.2 To retrieve the test results, issue the TAP command QHC (Query Hard Drive Self Test Results).
Refer to the table below for a list of responses. The 2nd character will count down to "0". When the
second character is a "0", the test is complete.
XX
Result
00
Test passes.
10
Test failed. Did not complete: aborted by the host.
20
Test failed. Did not complete: interrupted by reset.
30
Test failed. Did not complete: fatal error.
40
Test failed. Test completed with unknown failure.
50
Test failed. Test completed with electrical or write element failure.
60
Test failed. Test completed with servo/seek element failure.
70
Test failed. Test completed with read element failure.
X0
Test failed. Invalid response. (X: not 0-7)
51
Advertisement
Table of Contents
Need help?
Do you have a question about the Lifestyle AV38 and is the answer not in the manual?
Questions and answers
Как настроить медио центр Bose av38 без пульта
To set up the Bose Lifestyle AV38 media center without a remote:
1. Open the front cover of the media center.
2. Press the "Open/Close" button on the control panel to open the disc tray.
3. Insert Setup Disc 1 (label side up) and press "Open/Close" again to close the tray.
4. The disc will begin to play automatically. Follow the on-screen instructions using the TV.
Note: Without the remote, some functions may be limited, including switching inputs or navigating setup menus.
This answer is automatically generated