Page 1 Limited Liability Company “NPK Morsvyazavtomatica” DIGITAL INTEGRATED SHIPBOARD COMMUNICATION SYSTEM ITS-1010 Operating manual 26E, Kibalchicha str., 192174, Phone: +7 (812) 622-23-10 info@unicont.com St. Petersburg, Russia Fax: +7 (812) 362-76-36 www.unicont.com...
Page 3: Table Of Contents
Digital integrated shipboard communication system Operation manual ITS-1010 ABLE OF CONTENTS ............5 ESCRIPTION AND OPERATION OF THE YSTEM ........ 18 ESCRIPTION AND OPERATION OF THE YSTEM COMPONENTS ......................89 NTENDED USE ....................99 ECHNICAL SERVICE ................. 103 URRENT REPAIR OF THE YSTEM .........................
Page 4 Private Branch Exchange Personal computer Power over Ethernet System components SPTA Spare parts, tools and accessories System Digital integrated shipboard communication system ITS-1010 TS-1 Semi-annual technical service Annual technical service TS-2 Volts of alternating current Volts of direct current Version 16.4...
Page 5 ITS-1010 This operating manual describes the composition, design and specifications of digital integrated shipboard communication system ITS-1010 (hereinafter – the System), system components (hereinafter – SC) and instructions for the correct and safe operation of the System (intended use, technical service, current repair), and disposal instructions for the SC.
Page 6: Description And Operation Of The System
Digital integrated shipboard communication system Operation manual ITS-1010 DESCRIPTION AND OPERATION OF THE SYSTEM ’ 1.1 T YSTEM S PURPOSE The System provides ship internal public address, telephone and radiotelephone communication, transmission of commands, general alarm and radio broadcasting on sea and river-going vessels of all classes.
Page 7 Digital integrated shipboard communication system Operation manual ITS-1010 1.3 S TRUCTURE AND OPERATION OF THE YSTEM 1.3.1 General description The System is a network integration of PA, telephone and radiotelephone communication as well as transmission of commands, general alarm and radio broadcasting, which may operate together and independently.
Page 8 Digital integrated shipboard communication system Operation manual ITS-1010 b) telephone communication with:  standard communication services from every telephone without additional settings;  value added services enabled and disabled by a user;  optional communication services that are connected by the Manufacturer in compliance with the order list.
Page 9 Digital integrated shipboard communication system Operation manual ITS-1010 m) automatic main / standby power switching to ensure uninterruptible operation of the SC; n) connection of special automated PC-based working place to administrate, configure and provide diagnostics of the System; o) 365 / 24 / 7 operation.
Page 10 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description To provide switching of PA subscribers, exchange of digital voice communication with PA extension Central unit 19-CU units and telephone subscriber network To switch signals received via PA lines from PA...
Page 11 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description Microphone panels Microphone panel CP-3 To transmit voice communication via PA lines. One-channel Microphone panel CP-6 Microphone panel CPW-3 To transmit voice communication via PA lines. One-channel, waterproof Microphone panel CPW-6 Microphone panel CP-3-19 To transmit voice communication via PA lines.
Page 12 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description Alarm buttons To provide alarm signaling via one, two or three Alarm buttons PSK alarm circuits. Waterproof To provide alarm signaling via one, two or three Alarm explosion-proof buttons PKIVA alarm circuits.
Page 13 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description To generate alarm signaling and control alarm Alarm generator AG-1 circuits To convert sound signal amplitude within Matching transformer T-140 broadband Reception and transmission of sound signals by Digital radio station DRS...
Page 14 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description Radiotelephones Radio terminal PT-ADC Power supply unit PS-ADC provide services radiotelephone Base station / Charger BS/CH-ADC communication, DECT/GAP standard with an Radio terminal PT-ADCW option to call to wire network of shipboard...
Page 15 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description Loudspeaker LS-5 Loudspeaker LS-6 Loudspeaker LS-7 Loudspeaker LS-8 Loudspeaker LS-9 Loudspeaker LS-10 Loudspeaker LS-12 Loudspeaker LS-13 Loudspeaker SDL Loudspeaker DSP-15 (Ex) Loudspeaker GVR-Prometey Loudspeaker LF-1 Communication devices and accessories To ensure convenient talk-back communication...
Page 16 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description To connect network equipment by means of patch Patch-panel PP cables To connect external microphones to substations Socket SM To connect analog or digital subscriber terminal through RJ11 connector to analog or digital...
Page 17 Digital integrated shipboard communication system Operation manual ITS-1010 Name Description Alarm devices Howler HW1 To initiate light alarm signaling on open deck and Buzzer-howler BH1 in noisy areas Sound signaling unit A To initiate light and sound alarm signaling, Sound and light signaling unit AL...
Page 18 Digital integrated shipboard communication system Operation manual ITS-1010 1.6 M ARKING AND SEALING The System has a nameplate displaying: name and serial number, the Manufacturer. The nameplate is located on the rack enclosure. The SC have nameplates where the following information may be displayed: ...
Page 19: Description And Operation Of The System Components
Digital integrated shipboard communication system Operation manual ITS-1010 DESCRIPTION AND OPERATION OF THE SYSTEM COMPONENTS 2.1 C ENTRAL UNITS 2.2.1 Central unit CU-0131 type Central unit CU-0131 type is designed for operation in PA network. It provides channels for two-way voice communication and ensures automatic switching of the network subscribers.
Page 20 Digital integrated shipboard communication system Operation manual ITS-1010 2.2.2 Central units CU-200, CU-400 Central units CU-200 and CU-400 are designed for operation in PA network. They provide channels for two-way voice communication. Microphone panels, an entertainment source and PA sound control unit may be embedded into the central units on customer demand.
Page 21 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose Constant glowing with red means that amplifier Overload is overloaded Amplifier operation Constant glowing with orange means that Overheat LEDs amplifier is overheated Constant glowing with green means that...
Page 22 Digital integrated shipboard communication system Operation manual ITS-1010 Table 8 – Description and purpose of controls and LEDs of CU -10 Position Name Designation Purpose  Speaker To reproduce audio signals Constant glowing means that power is READY available, and unit is ready for operation...
Page 23 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 5 – Layout and designation of controls and LEDs of 19-CU-6 Table 9 – Controls and LEDs of 19-CU-6 Position Name Designation Purpose Constant glowing means that power is Power status LED...
Page 24 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 6 – Layout and designation of controls and LEDs of ITS-CUICB Table 10 – Description of controls and LEDs of ITS-CUICB Position Name Designation Purpose Constant glowing means that power is...
Page 25 Digital integrated shipboard communication system Operation manual ITS-1010 2.2.6 Central unit ITS-CUA Central unit of ITS-CUA type is designed to create isolated telephone subscriber network, switch the lines of internal subscribers automatically, and connect with coastal PBX. Quantity of internal and external lines depends on the central unit type.
Page 26 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 8 – Layout and designation of controls and LEDs of ITS-CUIP Table 11 – Description of controls and LEDs of ITS-CUICB Position Name Designation Purpose Constant glowing means that power is...
Page 27 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 9 – Layout and designation of controls and LEDs of MS-18.12.6-WM Figure 10 – Layout and designation of controls and LEDs of MS-18A.12.6.3-WM Version 16.4...
Page 28 Digital integrated shipboard communication system Operation manual ITS-1010 Table 12 – Description of controls and LEDs of main substations Position Name Designation Purpose  Speaker To reproduce audio signals Constant glowing means that there are no faults, Ready Group of LEDs...
Page 29 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose HOLD To hold a call in PA mode CALL To ensure a call To call a bridge wing substation. Constant glowing means that call is connected Microphone control To switch on/off the microphone.
Page 30 Digital integrated shipboard communication system Operation manual ITS-1010 Table 13 – Description of controls and LEDs of PT-CMIP Position Name Designation Purpose  Speaker To reproduce audio signals Constant glowing means that power is available, and Ready Group of LEDs...
Page 31 Digital integrated shipboard communication system Operation manual ITS-1010 2.2.3 Extension panel EP type Extension panel EP type is designed to increase subscriber capacity of talk-back station PT-CMIP type. It is a panel with keypad to call subscribers. Quantity of subscribers and mounting type depend on the type of panel.
Page 32 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose Built-in To transmit audio signals microphone To call and answer a call. LED operation modes:  constant glowing means that the call is connected; Call button with CALL ...
Page 33 Digital integrated shipboard communication system Operation manual ITS-1010 Table 15 – Description of controls and LEDs of S3 Position Name Designation Purpose Connector – To connect external intercom device or microphone Weipu WA22K4Z2 To call and answer a call. LED operation modes: ...
Page 34 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose  constant glowing means that the call is connected;  uniform flashing indicate connection loss;  short frequent flashing indicates an incoming call;  long-term glowing with short breaks indicates...
Page 35 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 15 – Layout and designation of controls and LEDs of PHS1 Table 17 – Description of controls and LEDs of PHS1 Position Name Designation Purpose  Speaker To reproduce audio signals...
Page 36 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose To call and answer a call in PA mode (only 1 to 9) or dial a number in telephone communication mode. LED operation modes:  no glowing means that subscriber terminal of the corresponding number is not configured;...
Page 37 Digital integrated shipboard communication system Operation manual ITS-1010 Table 18 – Description of controls and LEDs of CP-6-WM Position Name Designation Purpose To select PA line. Group of buttons 1 to 6* Constant glowing means that the PA line is selected...
Page 38 Digital integrated shipboard communication system Operation manual ITS-1010 Table 19 – Description of controls and LEDs of CP-6.6-WM Position Name Designation Functionality To initiate alarm. Constant glowing indicates 1 to 6** Group of buttons the initiated alarm ALARMS* with LEDs...
Page 39 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 18 – Layout and designation of controls and LEDs of AP-6-WM Table 20 – Description of controls and LEDs of AP-6-WM Position Name Designation Purpose To initiate alarm. Constant glowing indicates the...
Page 40 Digital integrated shipboard communication system Operation manual ITS-1010 2.6 P OWER AMPLIFIERS 2.6.1 Amplifier TPA-15 Amplifier TPA-15 type is designed to amplify sound signals received from the microphone, ISDN lines or linear audio input. Figure 19 describes TPA-15 exterior, layout and designation of controls and LEDs.
Page 41 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 20 – Layout and designation of controls and LEDs of TPA-200, TPA-400, TPA-200S Table 22 – Description of controls and LEDs of TPA-200, TPA-400, TPA-200S Position Name Designation Purpose Constant glowing means that power mains...
Page 42 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 21 – Layout and designation of controls and LEDs of 19-TPA Table 23 – Description of controls and LEDs of 19-TPA Position Name Designation Purpose Overload Constant glowing with red indicates overload...
Page 43 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 22 – Layout and designation of controls and LEDs of 19-PAC-6 Table 24 – Description of controls and LEDs of 19-PAC-6 Position Name Designation Purpose Constant glowing means that the power is...
Page 44 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 23 – Layout and designation of controls and LEDs of 19-CHSW Table 25 – Description of controls and LEDs of 19-CHSW Position Name Designation Purpose Toggle switch On, Off To start and stop PA line audio control ...
Page 45 Digital integrated shipboard communication system Operation manual ITS-1010 Table 26 – Description of controls and LEDs of ENT-P1 and 19-P1 Position Name Designation Purpose Constant glowing means that the power is Power status LED available Control knob To change programs or broadcast band...
Page 46 Digital integrated shipboard communication system Operation manual ITS-1010 Headphones are designed as a headband with a speaker on each side; a cord to connect to transmission units is located on the side. Headphones are stored on a bracket (included in the scope of delivery); for dry areas. There are no controls or LEDs on the headphones.
Page 47 Digital integrated shipboard communication system Operation manual ITS-1010 2.7.9 Selector SELP Selector SELP type is designed for independent select of sound channels for one or several loudspeakers connected to one zone. It is a panel with a knob rotating clockwise and pointing at the program number.
Page 48 Digital integrated shipboard communication system Operation manual ITS-1010 2.7.16 PA line commutator 19-COM-4-6 PA line commutator 19-COM-4-6 is designed to switch amplified voice communication from central unit and entertainment source between six PA lines. Volume control override via three-wire (or four-wire at option) circuit. There are no controls or LEDs on the casing.
Page 49 Digital integrated shipboard communication system Operation manual ITS-1010 2.7.20 Digital radio station DRS Digital radio station DRS ensures half-duplex communication between a coast and ship, as well as receives an audio signal at the system loudspeakers. The system includes two types of radio stations: ...
Page 50 Digital integrated shipboard communication system Operation manual ITS-1010 2.8 M OUNTING RACKS ENCLOSURES 2.8.1 Mounting rack 19IR Mounting rack 19IR type is designed to house the System’s modular equipment. The rack includes a steel extra strong frame standing on four points, and two brackets –...
Page 51 Digital integrated shipboard communication system Operation manual ITS-1010 2.8.3 Fan unit ITS-FU-4 Fan unit ITS-FU-4 is designed to provide air circulation inside the rack and exhaust hot air through the duct. Figure 30 describes exterior, layout and designation of controls and LEDs of the unit.
Page 52 Digital integrated shipboard communication system Operation manual ITS-1010 The enclosure is made of stainless steel and outfitted with hinges for wall mounting. The door has a doorstop (opening angle – 105°). The bottom part of the enclosure is outfitted with cable glands to connect the SC. The interior of enclosure is heated automatically when the temperature outside is below than –15 °С.
Page 53 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 32 – Layout and designation of controls and LEDs of PT-2А Table 33 – Description and assignment of controls and LEDs of PT-2А Position Name Designation Purpose Menu PROGRAM/EXIT To access and exit the menu...
Page 54 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose Navigation and To navigate up, down, left and right in the ОК confirm key menu. The central key confirms the select To receive information on the calling FLASH...
Page 55 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose 0 to 9 Numeric keys to dial the number Dialing keys Key to input value added services code To redial the last called number; to make a Pause...
Page 56 Digital integrated shipboard communication system Operation manual ITS-1010 Table 35 – Description and assignment of controls and LEDs of PT-3CIP Position Name Designation Purpose  Speaker To reproduce audio signals – Indication of available power and line status Клавиша удержания...
Page 57 Digital integrated shipboard communication system Operation manual ITS-1010 Table 36 – Description and assignment of controls and LEDs of PT-2IP Position Name Designation Purpose To switch between lines, and to indicate call modes. Operation modes of LED:  constant glowing with green – incoming call, –...
Page 58 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 36 – Layout and designation of controls and LEDs of PT-VC Table 37 – Description and assignment of controls and LEDs of PT-VC Position Name Designation Purpose  Video camera To provide video calls To display information on status, calls, and ...
Page 59 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose 0 to 9 Numeric keys to dial a number To switch to tone dial number Dialing keys Key to input value added services code +, – Volume control To control volume of the handset 2.9.3 Analog waterproof telephones...
Page 60 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 38 – Layout and designation of controls and LEDs of PT-CMAW Table 39 – Description and assignment of controls and LEDs of PT-CMAW Position Name Designation Purpose Bright frequent flashing indicates ...
Page 61 Digital integrated shipboard communication system Operation manual ITS-1010 2.9.4 Digital waterproof telephones Digital waterproof telephones are designed for communication in telephone networks on open deck and in cargo holds. The System includes two types of digital waterproof telephones: PT-2IPW and PT-3CMIPW;...
Page 62 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose Redial To call the last dialed number Clear To end a call Pause To make a pause during the call Volume control To control volume of the handset...
Page 63 Digital integrated shipboard communication system Operation manual ITS-1010 2.9.6 Digital explosion-proof telephones Digital explosion-proof telephones are designed to provide communication in telephone networks in explosion-hazardous areas. The System includes two types of digital explosion-proof telephones:  Auteldac 6 VoIP (for controls and LEDs, see figure 41; for the description and assignment, see table 42);...
Page 64 Digital integrated shipboard communication system Operation manual ITS-1010 2.9.7 Service telephone PT-SYSA Digital service telephone PT-SYSA is designed to provide service functions and communication in telephone network. Figure 42 describes controls and LEDs of the telephone. Description and assignment of controls and LEDs are given in table 43.
Page 65 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose To switch on the speaker mode. If the mode is Speaker mode Speaker active, the LED is glowing with red 0 to 9 Numeric keys to dial a number...
Page 66 Digital integrated shipboard communication system Operation manual ITS-1010 Table 44 – Description and assignment of controls and LEDs of PT-FAX Position Name Designation Purpose Automatic Number To identify the calling number Identification Stop To stop operation or delete characters STOP To display information on the status, calls and ...
Page 67 Digital integrated shipboard communication system Operation manual ITS-1010 2.10 R ADIOTELEPHONES 2.10.1 Radiotelephones PT-ADC Radiotelephones PT-ADC include:  radio terminal PT-ADC is designed to provide communication in radiotelephone networks, DECT/GAP standard with an option to call to internal shipboard wired telephone network;...
Page 68 Digital integrated shipboard communication system Operation manual ITS-1010 Position Name Designation Purpose Clear To end the call, to switch on/off radio terminal 0 to 9 Numeric keys to dial a number Dialing keys To switch to tone dial mode Key to input value added services code –...
Page 69 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 45 – Layout and designation of controls and LEDs of PT-ADCW Table 46 – Description and assignment of controls and LEDs of PT-ADCW Position Name Designation Purpose  Speaker To reproduce audio signals To display information on status, calls and ...
Page 70 Digital integrated shipboard communication system Operation manual ITS-1010 2.10.3 Radiotelephones PT-DC Radiotelephones PT-DC include:  radio terminal PT-DC is designed to provide communication in radiotelephone networks, DECT/GAP standard with SIP-telephony support;  base station BS-DC is designed to organize radio channel;...
Page 71 Digital integrated shipboard communication system Operation manual ITS-1010 2.10.4 Radiotelephones PT-NRTU Radiotelephones PT-NRTU include:  radio terminal PT-NRTU is designed to provide communication in radiotelephone networks with an option to deploy DECT-network, and roaming support. The unit is capable of calling the wired shipboard telephone network. Waterproof;...
Page 72 Digital integrated shipboard communication system Operation manual ITS-1010 Table 48 – Description and assignment of controls and LEDs of PT-NRTU (DH8-ABАB) Position Name Designation Purpose reproduce call signaling voice  Speaker communication Volume control To control the speaker or loudspeaker’s volume To display information on status, calls and ...
Page 73 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 49 – Layout and designation of controls and LEDs of SW-24 Table 49 – Description and assignment of controls and LEDs of switches SW type Position Name Designation Purpose Constant glowing means that the power is...
Page 74 Digital integrated shipboard communication system Operation manual ITS-1010 Table 50 – Description and assignment of controls and LEDs of BSC-16 Position Name Designation Purpose Constant glowing means that the power is Power status LED available Constant glowing means that the unit is...
Page 75 Digital integrated shipboard communication system Operation manual ITS-1010 Table 51 – Description and assignment of controls and LEDs of FXS-24 Position Name Designation Purpose Constant glowing means that the power is Power status LED available Constant glowing means that the channel...
Page 76 Digital integrated shipboard communication system Operation manual ITS-1010 Table 52 – Description and assignment of controls and LEDs of POE-SW-16-WM Position Name Designation Purpose Constant glowing means that the power is Power status LED available Constant glowing of the top LEDs 1 to 16 means that the corresponding port is connected.
Page 77 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 53 – Layout and designation of controls and LEDs of ITS-TBSW Table 53 – Description and assignment of controls and LEDs of ITS-TBSW Position Name Designation Purpose Constant glowing means that power is...
Page 78 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 54 – Layout and designation of controls and LEDs of FXO-8 Table 54 – Description and assignment of controls and LEDs of FXO-8 Position Name Designation Purpose Constant glowing means that the power is...
Page 79 Digital integrated shipboard communication system Operation manual ITS-1010 The System includes the following types of loudspeakers: a) LS-1 with input voltage 30 V, and LS-1/100 with input voltage 100 V, metal casing, small-sized, flush-mounted, only for internal areas, ceiling-mounted; b) LS-2 with input voltage 30 V, and LS-2/100 with input voltage 100 V, metal casing, small-sized, only for application inside the premises, wall-mounted;...
Page 80 Digital integrated shipboard communication system Operation manual ITS-1010 2.13 C OMMUNICATION DEVICES AND ACCESSORIES Intercom devices and accessories are designed for convenient communication in the noisy environment, on open deck, in cargo holds and explosion hazardous zones. 2.13.1 Handset with holder H-HS Handset with holder H-HS is designed for talk-back communication as an additional device.
Page 81 Digital integrated shipboard communication system Operation manual ITS-1010 2.14 C ONNECTING EQUIPMENT 2.14.1 Junction boxes Junction boxes are designed to split input circuits to several outputs. All boxes are hinged and may be mounted on open deck. Quantity of outputs and max. passing current depend on the type.
Page 82 Digital integrated shipboard communication system Operation manual ITS-1010 PS-103 PS-103-20 Figure 55 – Layout and designation of controls and LEDs of PS-103 2.15.2 Power supply unit 19-PS Power supply unit 19-PS is designed to power rack equipment with uninterruptible regulated voltage from the mains 220 VAC or standby mains 24 VDC.
Page 83 Digital integrated shipboard communication system Operation manual ITS-1010 2.15.3 Power supply unit ITS-PS Power supply unit ITS-PS type to power rack equipment with regulated voltage from the power mains 220 VAC, 50 Hz. Output voltage and power depend on the unit’s type.
Page 84 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 58 – Layout and designation of controls and LEDs of ITS-CH Table 57 – Description and assignment of controls and LEDs of ITS-CH Position Name Designation Purpose Constant glowing means that the...
Page 85 Digital integrated shipboard communication system Operation manual ITS-1010 2.15.5 Power supply unit ITS-PS Power supply unit ITS-PS powers SC from shipboard power mains 220 VAC or 24 VDC (switching of one network to another) or from integrated accumulator battery 18 А·h, rated voltage 27 VDC and power 350 W.
Page 86 Digital integrated shipboard communication system Operation manual ITS-1010 Figure 60 – Layout and designation of controls and LEDs of 19-BPS-1000 Table 59 – Description and assignment of controls and LEDs of 19-BPS-1000 Position Name Designation Purpose On/off button To start and stop unit operation To indicate operation from external mains Panel of unit’s...
Page 87 Digital integrated shipboard communication system Operation manual ITS-1010 Table 60 – Description and assignment of controls and LEDs of ITS-APS Position Name Designation Purpose Constant glowing means that the Power LEDs Main, Standby corresponding power is available To protect connected SC against faults Group of fuses with in the power network.
Page 88 Digital integrated shipboard communication system Operation manual ITS-1010 2.16 S IGNALING UNITS ALARM DEVICES Signaling units (alarm devices) are designed to provide light and (or) sound signaling when general alarm or other alarms are actuated, and to repeat incoming call signaling.
Page 89 Digital integrated shipboard communication system Operation manual ITS-1010 2.16.7 Howler HW1 type Howler HW1 type is designed for sound alarm signaling on the open deck and in noisy areas. A customer may choose from power supply range available for the unit’s types.
Page 90: Intended Use
Digital integrated shipboard communication system Operation manual ITS-1010 INTENDED USE 3.1 O PERATIONAL LIMITATIONS Select the place for installation of the SC in compliance with operational limitations, see table 1. Install the SC according to the outline and installation dimensions.
Page 91 Digital integrated shipboard communication system Operation manual ITS-1010 Outgoing call CU-10, main stations, talk-back stations types: Press the key with a number of subscriber PT-CMIP, PH, SDP, S1-3, S1-5, S2-3, S2-5 Talk-back stations type: S1, S2, S3, S4 Press the call button...
Page 92 Digital integrated shipboard communication system Operation manual ITS-1010 Selective call CU-10, main stations, talk-back stations types: Press the keys with the numbers of selected subscribers PT-CMIP, PH, SDP, one by one S1-3, S1-5, S2-3, S2-5 To connect additional subscriber during communication...
Page 93 Digital integrated shipboard communication system Operation manual ITS-1010 3.3.2 Telephone network 3.3.2.1 Standard communication services To call a subscriber in telephone network, use a telephone; the Manufacturer’s representative assigns an individual number to each telephone during configuration. Table 62 describes instructions on how to use telephones.
Page 94 Digital integrated shipboard communication system Operation manual ITS-1010 Temporary barring of incoming calls Selective barring of incoming calls Barring of incoming calls from all Barring of incoming calls from subscribers of internal network except NUMBER until the time specified at...
Page 95 Digital integrated shipboard communication system Operation manual ITS-1010 Conference, parallel add-on NUMBER1, NUMBER2, NNUMBER3 … NUMBER *71*NUMBER1*NUMBER2*NUMBER3*…*NUMBER# Note – The service allows the initiator to create a conference with 2 – 10 participants. Pre-defined conference call Note – The list number (С) is selected by dial keys (0 … 9).
Page 96 Digital integrated shipboard communication system Operation manual ITS-1010 3.3.2.3 Optional communication services The Manufacturer’s representative enables optional communication services while configuring the System in compliance with the order list. To activate optional services, no special actions are needed. 3.3.2.4 Video communication Use telephone PT-VC type for video communication.
Page 97 Digital integrated shipboard communication system Operation manual ITS-1010 3.3.4 Alarms The System generally operates with alarms represented in table 64. For the procedure of alarm actuation, see table 65. Table 64 – Types of alarms Types of alarms Other alarms actuated...
Page 98 Digital integrated shipboard communication system Operation manual ITS-1010 Table 66 – Transmission of commands via PA lines Subscriber’s equipment Procedure Microphone panels, CU-10 Select one, several or all zones by pressing the corresponding buttons in the group PA LINES, press MIC button to switch on the microphone, and say the command.
Page 99 Digital integrated shipboard communication system Operation manual ITS-1010 Table 68 – PA lines audio control Subscriber’s equipment Procedure 19-CHSW Using selector Channel select PA line; set up the required CU-200, CU-400 (with an integrated volume by means of Volume knob audio control unit) Table 69 –...
Page 100: Technical Service
Digital integrated shipboard communication system Operation manual ITS-1010 TECHNICAL SERVICE 4.1 G ENERAL DESCRIPTION The System’s technical service shall be performed by the staff familiarized with its composition, structure and operational features. In order to provide safe and reliable operation of the System, the staff shall maintain the following types of technical service: –...
Page 101 Digital integrated shipboard communication system Operation manual ITS-1010 Table 71 – Checklist No 1. Visual check of the SC To be done Routine Man-hours per 1 SC Check completeness and appearance of the SC; mechanical damage, paint defects must be absent;...
Page 102 Digital integrated shipboard communication system Operation manual ITS-1010 To be done Routine Man-hours per 1 SC  group LEDs State of external intercom device and buttons of microphone panels, combined microphone panels;  group LEDs ALARMS, and buttons of combined microphone panels, and alarm panels;...
Page 103 Digital integrated shipboard communication system Operation manual ITS-1010 To be done Routine Man-hours per 1 SC Broadcast emergency command to PA lines 2 people according to 3.3.5 of this operating manual, 1 hour control priorities at the same time, see 1.3.3 Initiate alarms according to 3.3.4 of this operating...
Page 104: Current Repair Of The System
Digital integrated shipboard communication system Operation manual ITS-1010 CURRENT REPAIR OF THE SYSTEM 5.1 G ENERAL INSTRUCTIONS Re-complete portable SPTA kit using baseline SPTA kit. 5.2 S AFETY FEATURES Any repair works must be performed by personnel examined and received proper qualifications in the area of the occupational safety.
Page 105 Digital integrated shipboard communication system Operation manual ITS-1010 Table 76 – Potential malfunctions of CU-200, CU-400 Malfunction Potential reasons To be done No glowing of power status Power circuit failure Check power circuits for short circuits. after unit If short circuit was not detected,...
Page 106 Digital integrated shipboard communication system Operation manual ITS-1010 Table 78 – Potential malfunctions of CU-10 Malfunction Potential reasons To be done Constant glowing of status Configuration error If PC-based working place is available, LED FAULT check configuration by means of...
Page 107 Digital integrated shipboard communication system Operation manual ITS-1010 Table 80 – Potential malfunctions of main substations and PT-CMIP Malfunction Potential reasons To be done No glowing of Ready LED Cable rupture Check the cable visually for any and constant glowing of damage.
Page 108 Digital integrated shipboard communication system Operation manual ITS-1010 Malfunction Potential reasons To be done Called subscriber cannot Microphone is faulty Replace the microphone hear the message during Subscriber line is faulty See above communication 5.3.3 Current repair of the System’s amplifiers Control operation of amplifiers by LEDs located on the front panels.
Page 109 Digital integrated shipboard communication system Operation manual ITS-1010 Table 84 – Potential malfunctions of PA equipment Malfunction Potential reasons To be done 19-CHSW does not display The unit is faulty and cannot To replace the unit, contact the the signal level...
Page 110 Digital integrated shipboard communication system Operation manual ITS-1010 5.3.6 Current repair of switches, network equipment, converters and fan unit Control operation of switches, network equipment, converters and fan unit by LEDs located on the front panels of the units. Troubleshooting is carried out by own personnel using portable SPTA kit.
Page 111 Digital integrated shipboard communication system Operation manual ITS-1010 Table 87 – Potential malfunctions of power supply units Malfunction Potential reasons To be done No glowing of power LED No input power Replace the fuse on the corresponding after the unit is switched on...
Page 112 Digital integrated shipboard communication system Operation manual ITS-1010 Table 88 – Potential malfunctions of signaling units Malfunction Potential reasons To be done No signaling of incoming No power of signaling units Provide power to the signaling units call (switch on mains power)
Page 113: Storage
Digital integrated shipboard communication system Operation manual ITS-1010 STORAGE The System must be stored in packaging inside heated and ventilated premises with air-conditioning at temperature + 5 °С to + 40 °С and relative humidity no more than 80 % at + 25 °С, with the concentration of dust, oil, moisture and aggressive impurities in the air within the required limits for the working areas of production facilities.
Page 114: Transportation
Digital integrated shipboard communication system Operation manual ITS-1010 TRANSPORTATION The System must be transported in the Manufacturer's transportation package in closed means of transport. Types of shipment: -motor vehicle and railroad transportation in closed means of transport (covered cars, multipurpose containers);...
Page 115: Disposal
Digital integrated shipboard communication system Operation manual ITS-1010 DISPOSAL Packaging material, SC damaged during operation, and any overage equipment must not be disposed as standard household wastes, since they contain the materials suitable for reuse. Decommissioned and non-used components of the System must be delivered to a special waste disposal center licensed by local authorities.
Page 116: Warranty
The Manufacturer will not consider damage claims in case of case violation of operating conditions. More information about warranty terms you can find on the official website of NPK MSA, LLC, section Support. Address and contacts of the Manufacturer's service centre: NPK MSA, LLC 26E, Kibalchicha str., 192174, St Petersburg, Russia...

MSA ITS-1010 Operating Manual

Quick Links

Need help?

Questions and answers

Related Manuals for MSA ITS-1010

Summary of Contents for MSA ITS-1010

Table of Contents