Extend Window Filler Panels; Install Window Lock/Sash Seal; Chassis Into Cabinet/Front To Unit; Safety Lock - Frigidaire FAS226R2A - Heavy Duty Room 22,000 BTU Air Conditioner FAS226 Installation Instructions Manual
For heavy duty (fas models) and median (fam models) air conditioners
Hide thumbs
Also See for FAS226R2A - Heavy Duty Room 22,000 BTU Air Conditioner FAS226:
- Use & care manual (12 pages) ,
- Use and care manual (12 pages) ,
- Wiring diagram (1 page)
Table of Contents
Advertisement
Extend Window Filler
6
Panels
1. Carefully raise window to expose filler panel locking
screws. Loosen screws so filler panels slide easily.
LOCKING SCREWS
2. Extend panels to fill window opening completely.
Tighten locking screws on top.
3. Close window behind top angle.
Install Window Lock
7
and Sash Seal
1. Trim sash seal to fit window width. Insert into space
between upper and lower sashes.
2. Attach right angle safety lock as shown.
WINDOW SASH SEAL
SAFETY LOCK
3/4" long hex-
head screw
Install Chassis into
8
Cabinet and Install
Front to Unit
1. Lift air conditioner and carefully slide into cabinet
leaving 6" protruding.
2.
DO not push on controls OR finned coils.
3. Be sure chassis is firmly seated towards rear of cabinet.
4. Installation of front is the reverse of removal outlined
in Section 1.
5
Hide quick links:
Advertisement
Table of Contents
