Related Manuals for Roborock S8 Max Ultra
Summary of Contents for Roborock S8 Max Ultra
- Page 1 Roborock S8 Max Ultra with Refill and Drainage System Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
- Page 2 English Français Español...
-
Page 3: Table Of Contents
Contents 04 Safety Information 06 Battery and Charging 06 International Symbols Explanation 07 FCC/IC Statement 08 Product Overview 09 Installation 11 Connecting to the App 12 Instructions for Use 14 Routine Maintenance 16 Environment Protection Information 16 Basic Parameters 17 Common Issues... -
Page 4: Safety Information
• Do not sit or stand on the robot or dock. • To prevent corrosion or damage, do not use any disinfectant and only use cleaning solution recommended by Roborock in the solution cartridge. • Do not put any low objects (such as shoes, mats) near raised areas like stairs. Otherwise, the robot may fall down caused by malfunctional sensors. - Page 5 • Do not operate the vacuum in an area where there are lit candles or fragile objects on the floor to be cleaned. • Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may accidentally hit or bump into. •...
-
Page 6: Battery And Charging
Grounding methods ADAPTER GROUNDED OUTLET METAL SCREW GROUNDED OUTLET BOX TAB FOR GROUNDING GROUNDING PIN SCREW AA200 Battery and Charging • Keep the charging dock away from heat (such as radiators). • Do not wipe the charging contacts with wet cloth or wet hands. •... -
Page 7: Fcc/Ic Statement
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Correspondence of the responsible party in USA Company Roborock Technology Co. Address ROOM 1227, 12TH FLOOR, 1000 N. WEST STREET, WILMINGTON, DE 19801 Email... -
Page 8: Product Overview
Robot (Bottom View) VibraRise Mop Cloth Product Overview A2-1—Cliff Sensors A5-1—Hook and Loop Pads Robot (Top View) A2-2—Carpet Sensor Note: Secure the mop cloth flat in place. A2-3—Omnidirectional Wheel —Mop Only/Child Lock A2-4—Flexible Side Brush Edgewise Mop Cloth • Press to start Mop Only A2-5—Main Brushes •... -
Page 9: Installation
A11-7—Cleaning Solution Cartridge A13-2—Drainpipe (3/8" pipe) × 1 items becoming tangled in, struck by, A11-8—Dust Bag Slot A13-3—Harness Tube × 1 or knocked over by the robot. A13-4—1/4" Lock Plate × 5 A11-9—Filter B1-2— When using the robot in a raised A13-5—3/8"... - Page 10 the mop washing module in shipment good WiFi coverage and a power outlet • When installing the pipes, make sure to insert them all the way in. or power strip nearby. Reserve a space at the bottom. • Store the plugs removed from the dock and additional of at least 0.305 m (1 ft) in height, 0.42 m pipes and lock plates properly.
-
Page 11: Connecting To The App
• Ensure the connection between the drainpipe and the Powering On & Charging floor drain or sewer pipe is securely fastened. Search for "Roborock" in the App Store • If other water-using equipment is connected to the or Google Play or scan the QR code to... -
Page 12: Instructions For Use
• To make sure the robot returns to the dock Open the Roborock app, tap the "Scan to automatically, start the robot from the dock and do recommended by Roborock in the solution cartridge. - Page 13 press and hold to wash the mop cloths Press to send the paused robot back the dock and auto-emptying will begin and then resume cleaning. to the dock. The power indicator light will as needed. To manually start emptying, breathe during robot charging. press on the docked robot or tap the Note: Placing a paused robot on the dock manually will...
-
Page 14: Routine Maintenance
D1-7— Turn over the robot and press the Omnidirectional Wheel • Placing a malfunctioning robot on the dock manually will end the current cleanup. two latches inwards to remove the * Clean as required. main brush cover. D3-1— Use a tool, such as a small Resetting the System D1-8—... - Page 15 Washable Filter Robot Sensors Water Filter * Clean every 2 weeks and replace every 6-12 months. * Clean as required. * Clean as required. D6-1— Remove the filter. Use a soft, dry cloth to wipe and clean all Pull out the filter. Press the latch on the side sensors, including: of the filter to flip it downwards open.
-
Page 16: Environment Protection Information
Basic Parameters Note: Make sure the disposable dust bag is properly Note: If the robot will be left unused for a long period, installed to avoid waste escaping and damaging the turn it off and charge it at least every three months to dock. -
Page 17: Common Issues
• Unable to connect to WiFi abruptly. There may be an mopping module • Check whether the edgewise mopping module is error with your router settings. Contact Roborock is unable to jammed. rotate Customer Service for help with troubleshooting. - Page 18 Common Issues Issue Solution Issue Solution The robot begins • The mop cloths are not attached properly. Reinstall • The wall sensor, cliff sensors, or carpet sensor may be Reduced to miss certain them. dirty. Clean them with a soft, dry cloth. mop washing spots •...
Need help?
Do you have a question about the S8 Max Ultra and is the answer not in the manual?
Questions and answers